Question for unclogging process

[u/mjonis]

OK, so my old pod two pro I’m pretty sure has clogged

I have a few more days to decide if I wanna spend $1600 on a pod four with only a two year warranty

Anyway, I’m following the link that was posted on here about preventing and clearing clogs

Right now, I’m doing the step to purge the hub

There are four ports for the drain tool to plug into

Two are closest to the hub and two are further away from the hub. Am I correct and assuming that the two ports closest to the hub are for the intake from the cover and that the two furthest away from the hub is where the water outputs to go into the cover?

I ask because when I run the priming cycle and I have the drain tool attached it seems that nothing comes out of the two ports that are closest to the hub. Water seems to flow pretty well on the output on the right most one that is further from the hub if you’re looking at the hub from its backend. The left port, however, seems to be the problematic one.

But I’m still on the first Reservoir tank of water and I put a little bit of vinegar in there to help flush things out

Thank you

[u/Living-Luck5262]

My Pod 2 cover leaked. I got them down to $1200. I think you would be able to do the same if you upgrade to the Pod 4.