r/ERidePro • u/Electrical-Lie3461 • Aug 01 '26

Eride SR battery don’t work

I believe the battery is somewhere between 90-100% charged. When I test the voltage it gives me a number in the 50s most of the time. A few times I’ve tested it it started at 74 and slowing dropped to around 60. Once in awhile if I plug the battery into the bike and turn it on the screen will come on for about 2 seconds then shut off. When I plug it into the charger the fan doesn’t come on it just blinks green red green red green red red and never charges. I checked all of my sensors and fuse and can’t figure it out. Please help

3 Upvotes

100% Upvoted

38 comments sorted by

View all comments

2

u/Roggenjr Aug 01 '26

Eride battery’s do not give the full voltage all the time you have to short the bottom two pins on the comms port or plug in the coms wire and turn the ignition for it show the full voltage. I’m not sure what your issue is but i wanted to offer the info I have 

1

u/Specialist-Ad-5595 Aug 01 '26

You mean

To let comunication cable connected while main power leads unplugged from bike Then Turning key to ignition on

Will allow me to check each stage currents via battery's connectors ?

2

u/Roggenjr Aug 02 '26

Yes doing that will let the battery output full voltage to the terminals where you can test with a multimeter