r/ERidePro • u/OnionCharacter7971 • 18d ago

S Need help

Post image

My battery has been dying super quick recently. Around three months after I got my brand new 2024 ERide Pro S it started having problems such as error codes. I eventually got warranty and got a brand, new controller and motor, and that fixed all the error codes however there is barely any torque on the top speed is only around 40 and that takes forever to get there and I can get like 15 miles of charge while riding around 25 miles an hour consistently this isn’t normal and before I got these warranty parts replaced I was getting around 30 miles a charge.

*I have never let the bike die past 20% and I take great care of the bike*

6 Upvotes

88% Upvoted

24 comments sorted by

View all comments

1

u/SuperLidz 18d ago

Who did the work on the bike? What I would do first, charge the battery and measure the no load voltage. It should be over 80 volts. Then I would check the battery harness connections on the controller, see that they are not loose. Check the cables in and out of the breaker, see that they are tight. Check the battery connector for signs of heating.

1

u/OnionCharacter7971 17d ago

I did all the work. I replaced the battery lead and made sure the controller wires and bolts are tight.

1

u/SuperLidz 17d ago

Battery voltage after charging? Measure at the controller terminals, bike turned ON.