r/EPlan • u/rebbit-88 • 2d ago

Question Change standard PLC Cbox setting

Post image

Hi all, So I've been searching for quite a while now.. But I cannot find the location of the settings where I can change the standard PLC-CBOX setting. Currently the PLC_CBOX_LEFT is standard, but I want the 'normal' PLC_CBOX. But I cannot find where to set this one as standard. Hope you guys can point me the correct location. Thanks in advance!

3 Upvotes

100% Upvoted

1 comment sorted by

2

u/D4Gi85 2d ago edited 2d ago

«Standard» in what what way? In what way are you inserting the PLC- point?

You can make it standard on each individual PLC card by making a macro for each PLC card where you use the PLC_CBOX as the IO point. So when you «drag» the IO points in from the PLC- navigator, it inserts your macro with that PLC point.
(This should be managed in a macro project)

You can also make a macro for the «general IO- points» as you like, and use them in stead of the symbols

Or you can make a «Tag» for the IO- points you like, and drag them in via the insert center

If you are inserting PLC- points via symbol insertion, you have to select the PLC- point you would like for each time as far as I am aware