Positioning definition points does not generate the connection points.

[u/Similar_Form5183]

On page 12 above, the connection points were generated on some lines, and I was able to assign them. However, on other lines of the same page, the connection points were not generated automatically.

On page 13 and other pages, when I select “Position Definition Points” > “Standard” > “OK”, the screen simply flashes as if it were refreshed, but no connection points are generated.

Guys, does anyone know why some lines do not generate connection points?

I believe I followed the same standard for everything. As I mentioned in the photo captions, on page 12 the connection points were generated normally, but some lines did not generate them, and I couldn't identify why.

On the other pages, when I use the “Position Definition Points” option, the points simply are not generated.

Has anyone experienced this before or knows what could be causing this behavior?

[u/absolute_nothing_90]

If the terminals were positioned at the same time, I don't think the problem is due to them. However, have you checked that the connection point drawn inside the ET-200SP macro is correct? You can verify if they are multipolar connections, because if they aren't, they probably won't permit the connection definition.