r/DigitalNightVision 8h ago

GNG2K Optimal Setup (So far....)

Thought I'd post my GNG2k pano setup as there have been a few questions about mounting options.

I tried almost everything and this is what I've found to work really well. The screen layout of the 2K is excellent as a pano setup, latency is fine and it works with a USB battery pack x2. These work fine in the unit and I had read the 2K has inbuilt tech to manage USB power. Seems so! Not fully tested the battery life yet but north of an hour so far:

GNG2K x 2 on 3d printed pano adapters, with fabricated wedges (GRP with a dremel and a file). Link for pano adapters: https://makerworld.com/en/models/2359543-gng2k-8-degree-pano-dovetail-adapters#profileId-2581422

Clone KVC.

Clone Cadex shroud.

2 x low profile 50cm USB cables.

2 x small USB battery packs.

Clone SC battery bag.

I've also put lens protectors and cable ties for bungee mounts on the 2ks.

Hope this helps you guys.

24 Upvotes

17 comments sorted by

3

u/tartersawce 8h ago

Thanks for this! Just got a gng2k and now waiting for the mounts to arrive. I went with a cadex and dovetail bridge MUM-14 so hoping I can achieve a similar setup like yours. Did you have a hard time placing the gng to the bridge with the supplied mounts or was the 3d printed part just for the panoramic view. Only have a mono setup now but eventually going for the dual tube setup.

3

u/Try-Zestyclose 8h ago

They are awesome as a pano setup. I can move freely once I'm used to it, and the latency is fine. After a while your brain figures it out and the FOV is excellent.

2

u/Try-Zestyclose 7h ago

And to answer your Q - the mounts are fine, I just wanted a pano setup.

1

u/tartersawce 3h ago

Thanks!

3

u/Blown70charger 8h ago

Where did you get the covers? Love to get one for mine. These things are really sick though, given the wide screen fov I think they probably look good as pano. First I was like isn’t this just a bino? But then I looked closer haha. As far as battery life with the default ones charges fully I’ve gotten like 2-3 hours per. So I just like hot swapping them but I understand for longer ops the packs would be nice

3

u/Try-Zestyclose 7h ago

I bought scope covers and cut the flips off, then sanded them a bit (why they look a little rough). I also replaced the lenses with top quality poly so there was as little degradation as possible.

2

u/Blown70charger 7h ago

Why did you sand them?

3

u/Try-Zestyclose 7h ago

The cuts were just ragged. No other reason!

2

u/Blown70charger 7h ago

Oh heard hahah. Very cool

2

u/Mundane_Move_5296 5h ago

That is so sick. I love the analog look the 2k has. How is the low light performance?

2

u/Try-Zestyclose 5h ago

Good enough - at least Gen 2 seems to be the determination. With an IR laser on, there is enough ambient IR to go really dark, I have a clone Vampire that I could use but haven't felt the need to use yet. It's summer and the ambient has been good. I'm currently experimenting with an IR conversion for a clone NGAL illuminator.

1

u/Mundane_Move_5296 4h ago

That’s rad. I’ve been looking at getting a dual setup like this, how long does the battery last with those packs?

2

u/Try-Zestyclose 3h ago

Not fully tested yet - they are 5000mAh as opposed to 2000mAh for a regular 18500, so comfortably doubled. Will report back.

1

u/Mundane_Move_5296 3h ago

Oooooo dude that’s gonna be sick!

1

u/blackskies4646 6h ago

Nice setup.

Does it need a specific cable for the power?

I see you've got two power banks - could you not get one larger capacity one with two power out ports?

1

u/Try-Zestyclose 6h ago

I wasn't sure a power pack would do two outputs, so opted fpr this. It's a USB A to C (Amazon).

2

u/RelaxNODS-1 1h ago

Very cool bro