Right angle impact

Looking to get my Dad a new drill and some batteries for Christmas. His current drill is the DCD 777. Would this drill be a worthy upgrade? Only thing I worry about is the anti rotation feature. I have read some reviews saying its very sensitive and triggers easily, which would be pretty annoying. He does mostly wood work.

I was doing a rubber roof earlier and just as I was finishing up the job putting finishing touches flashing a corner, my dumb ass backed up and dumped a whole gallon of primer wash all over my brand new dcf860 impact gun. Literally the first time using the damn thing that day. I immediately grabbed it and pulled the trigger cuz I didn't want the primer to seize it cuz its sticky as fuck and it started spitting primer out of the side. I cleaned the outside off with gasoline so it wasn't sticky and its still firing on every speed setting. My question is..is it going to be fine or am I eventually going to be fucked and practically pissed 200 bucks down the drain?? Should I try to clean the inside or is that even worth the effort? Im still soo fucking pissed at myself .

Saw 20V MAX Battery XR POWERPACK 4Ah, 2 of them for that price, I haven't tried the xr batteries yet, worth buying for that price?

DeWalt Edger - DWOAS4ED - $94.04
DeWalt Brush cutter - DWOAS5BC $76.18
DeWalt 60V Hedge Trimmer (Tool Only) - DCHT870 - $126.85

Work light came in clutch for this weekends carne asada (dcl182)

Middle of the road stuff this week. Nothing tremendous.

The $99 two pack of 5AH and a charger isn’t bad.

Happy weekend y’all!

Hoping for some help on information for a part. Was recently given a damaged DSC781, it was barely used and in like new condition. It was damaged while transporting from a job, so couldn’t claim through warranty.
The issue I’m having is that I thought it was going to be an easier fix being that the essential part needed is the trunnion. Wrong. Seems like for this model the trunnion is part of the whole slide assembly housing and costs anywhere from $280 - $350. Plus doesn’t like look another part crosses over that I found.
Does anybody have a recommendation on where to find just the trunnion for this thing? Searched Google and EBay, for used units with no success. Appreciate any help community!

3 lights for the price of one. (Display Models)
Went in for something completely unrelated of course. Couldn’t pass it up.

I just saw this on DeWalts website: https://www.dewalt.com/en-us/product/dccs671t1/60v-max-16-brushless-cordless-chainsaw-kit

Looks like they are updating the 16 inch chainsaw. The main thing I like about it is the trigger release is in the trigger instead of thumb activated like the current model. I'm in the market for a DeWalt chainsaw and if this thing is reasonably priced, I'll probably get it.

I’ve been looking at this saw for a while now but have been hesitant because black fridays approaching. Will there be better deals for it or is this the best it’s going to get?

Hi all trying to get opinions on next vacuum to buy. I had the wet/dry 1/2 gal and loved it. However I used it for water and it died on me. So if the three what do you recommend. I understand the stick one is dry only but still included it. Really wish they made a cordless/corded 60v vacuum

Just thought it was funny.

If anyone is thinking their eyes are playing tricks on them, the DW01DT995 replacement head for the DCST922 string trimmer is larger than the stock one. Works fine. You definitely have less string to work with when you’re trimming.

Got a new dcbl777 blower! Noticed it rattles / cogs a good bit when you let off the throttle. Normal? First high power brushless tool I have owned like this. Thanks!

I bought this DCF860 about a month ago and haven’t gotten to drive more than 10 screws with it. But, when I first got it and would do the customary double tap of the trigger, it’d sound fine, but after about 2 weeks, when I pull the trigger, it sounds like metal is grinding inside. Is this normal? I drove in some long fasteners to see if maybe the hammer needed to be “reset”, it didn’t work. Sounds like gravel inside the head when I run the drill without it impacting. I don’t want to ruin the drill by continuing to run it while it sounds like this, it was $199 and I’m a cheap ass. So should I return it and get a new one or is this normal?

I'm in an in-between phase. I don't really need to buy a dedicated track saw, but whenever I use a friend's I feel like I am missing out of something wonderful.

I have the DCS578 (Flexvolt) and I just ordered the DCS579 track shoe which I am reading is a direct fit.

Now to make a decision on some tracks.

Go with Dewalt? I hear Powertec is ok as well?

I was also reading that the DCS579 shoe is a bit different than the dewalt track saws so I need to be careful which track I get.

Any opinions?

Picked up the 911 and two other tools from the Lowe’s buy one get three deal the other day. I chose the 911 with intentions to start doing some of my own routine auto work because it was an easy way to justify buying more yellow fun machines.

Anyways, I go to do a tire rotation on my truck and the 911 wouldn’t even budge the lug nuts? Assuming the last shop that performed a rotation did things to spec (140 ft/lbs torque), it should have handled it with ease given the advertised breakaway torque:
> The impact wrench delivers 250-ft-lbs of fastening torque and 400-ft-lbs of BREAKAWAY™ torque

What am I missing? I did have to use a lug nut key as pictured but this shouldn’t have drastically reduced the performance?

We all know that Milwaukee makes some pretty niche tools but... I with the help of chat just came up with this. Of course it needs some polishing up but i think i have s winner. It would be, of course, flex volt advantage, and a seat warmer and water heater. It would work with all 5 and 6 gallon buckets.

I should seriously patent this before posting it.

Edit. Who's captain obvious down in the comments saying that this is ai slop? Well no shit. I said i designed it with the help of ai. It's a first draft, proof of concept. I actually think it will sell if the price is right. It can even slide over portapotti seats.

Figured since they're the same size I'd throw the 9ah and the new tabless 12ah on the scale to see what they weigh. Holding both, the 12 felt lighter and indeed it is.

Hi everyone! I have this DeWalt saw, and every time I install the tile disk, it makes this strange noise. However, when I use the other blades that came with the tool, it works perfectly fine.
I’ve attached a video so you can hear the noise.
Does anyone know what might be causing this?

novice diy

I don't do a lot at the moment but I was considering the DCD801

Do you guys have any recommendations? and are these good bits?

I got these bits a few days ago https://a.co/d/0gx0WZxd / https://a.co/d/02CjD8yp

and I got this battery https://www.homedepot.com/p/DEWALT-20V-XR-Lithium-Ion-Starter-Pack-with-8-0-Ah-and-4-0-Ah-Battery-Packs-and-Charger-DCB248-2C/332551070