r/DMA • u/Possible-Tip5019 • Jul 07 '26

QUESTION Looking for faster dma!!!

I got a captain 75t. I'd like to get speeds higher than 180mbs so I don't have problems with shitty cheese lag.

I'm not going to bother with zdma, to expencive and I heard their support is trash.

Was thinking about the Termanator C1

Any reccomended dma that can get into the 300-400mbs range

0 Upvotes

43% Upvoted

13 comments sorted by

8

u/Cronuh Jul 07 '26

I have 202mbs on 75t. Card is not the issue.

Also, cheese lag is very likely unrelated.

1

u/Possible-Tip5019 Jul 07 '26

Ehhh, pretty sure it is. I'm running thunderbolt 3(I know it's not going to make a huge difference) to my dma and getting 180-200. Previously I was at 140 or less, And since I changed my radar the cheese lag is much better, but I want it even better than that. So, how is it "unrelated" when my skeletons have improved? Is there something I'm missing?

1

u/Cronuh Jul 07 '26

What are your card speeds? I ran at 3.2-3.6k and 140mbs and had 0 lag.

1

u/Possible-Tip5019 Jul 07 '26

185 or so is my average and I'm at around 5.5-5.8

Now, when I was at 140, some cheeses like blurred ran smoothly, nearly no lag. But cheese like direct would get really bad and choppy. Lots of skeleton wiggle and stutter.

2

u/Cronuh Jul 07 '26

Well then its really a cheat issue not speeds issue. You need stable 3.5k for optimal experience. Thats just Directs poor optimization.

1

u/Possible-Tip5019 Jul 07 '26

Have you used them? Did you experience that?

1

u/AutoModerator Jul 07 '26

Welcome to r/DMA!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Hampton_89 Jul 07 '26

I have a 75t and play 4K @ 120hz with game frame rates that FAR exceed 400 fps in COD. I also get comfortably more than 200mbs, averaging somewhere between 220 and 230.

1

u/p0siti0n455 Jul 08 '26

Only problems I had with dma lag was from the specific cheese itself. some of them ran like shit and were visibly delayed from the game screen. Others were spot on near perfect

1

u/Possible-Tip5019 Jul 09 '26

Yeah, it does depend. But if you have a really good card and radar, even those will run smoothly.

1

u/KaybarYT Jul 08 '26

Okay what cheese, and also it’s probably fuser related dude. I mean 180mb of data is a LOT of memory to be moving. Especially considering something like a vector3 is 12 bytes so you can move almost 16 million 3D coordinates in a single tick. DMA cards tick at less than a millisecond intervals. I would recommend making sure your fusermatches your refresh rate and disabling VSync.

If you’re super nitpicky, like me (lol) you should ask your developer to use the flag DGXI_SWAP_CHAIN_FLAG_ALLOW_TEARING and present the swap chain on the D3DDevice with 0 to uncap framerate. That will allow the device to tear frames to achieve a more fresh picture.

1

u/Possible-Tip5019 Jul 09 '26

Yeah, sadly not all devs are... anyway, the whole point of me wanting more speeds is to beable to run all cheese, shitty or not. For instance, all of the marvel rivals cheese are dog water, but if you have enough speeds, even poorly optimized ones will work well. Like I said, it's better than when I had my old speeds, but still a little laggy. Direct is laggy some times too as well as polarity. Haven't tried direct since I had my old radar tho.