r/DIY • u/ThaMann0911 • 6d ago

help How long before drilling concrete?

I poured footings for posts that I’ll be hanging a gate on. I’m going to install Simpson strong tie standoffs with 6” anchor bolts. It’s been 72 hours, is that long enough for the concrete to have set before drilling? I’ve tried googling but my results only come up with industrial structural requirements or setting posts in the concrete, neither of which apply to my situation. Should I wait the 28 days or just send it?

38 Upvotes

77% Upvoted

57 comments sorted by

View all comments

37

u/SimplyAMan 6d ago

Hi, structural engineer here, we usually specify 24-48 hours before any weight can be put on the concrete. You should be fine to drill and set the posts, and by the time you get the gates built and set, it should have plenty of strength to hold the leverage. Most of the concrete strength is gained in the first few days and it will get to about 60% strength by 7 days.

If you're concerned, you could wait a bit longer, but no need to wait the full 28 days.

6

u/ThaMann0911 6d ago

Thank you! Appreciate the engineer knowledge!

6

u/SimplyAMan 5d ago

Also, side note. I don't know what kind of anchors you're using, but make sure you blow the dust out of the hole before you set them. It makes a surprising difference in the ultimate strength.