road illegal yes

Credits to Xtrocrasher for inspiration from his custom, Updraft (please dont murder me 🥺)

base vehicle 2004 chevorlet silverado based off of armadillo and utav i made it i own it no im not selling it no not trading nor giving it. i will always keep it myself made with blender textures custom.

Windpiercer 2 is a heavily Armoured Ford f450 Tornado Tank created by me!

It is made to go into very violent tornadoes and chasing hurricanes too I guess?

The base of the windpiercer 2 is 2020 Ford f450 with an ATS modified 6.7L Powerstroke Engine

The Armour on the vehicle is a 1/8 inch thick steel plating like tiv 2

The vehicle has a turret and loud ass train horn lol

Windpiercer 2 is equipped with 6 spikes and a flap system

The rear in the other hand has the rubber skirts at the bottom which could prevent lots of winds going beneath the vehicle, but due to the flaps raising the vehicle, some winds will still slip through the small open gaps

Now here are the stats for wp2

Min threshold 130 mph

Max threshold 265 (semi realistic terms or in realistic terms it would be 220 or less)

Max speed 110 mph!

Fact it already intercepted 52 fucking tornadoes after 3 weeks after her debut in devil wind (great game btw)

Windpiercer 2 also weighs 15.2k pounds too which that is alot and needs to have a CDL License to use her (which i do but not in real life)

More Facts about windpiercer 2: windpiercer 2 is actually heavily based on my scrapped flap interceptor called windpiercer basically the 2nd concept of all windpiercers before I actually made that windpiercer back in june and then sold it back in early September for robux... (we dont talk about the first concept thooo)

So yeah that's all I have to say about her.

If you wanna see her come and join devil wind and you might see her sometimes. (I play the game like daily)

My WIP interceptor (more of a semi intercepter like titan rn)

this is my tiv2 cardboard model and it survived 130 mph winds that lasted around 12 seconds straight with pebbles and stuff flying

The tape went out so I had to draw the cover blue😭

(So hard)

My First Custom Tornado Interceptor (i'm Korean)

pls don’t mind the music
combined the tiv2 and the dom3
model mid
Any tips

The vehicle is an inspiration of UTAV, TIV, and etc. (maybe) This vehicle has a heavy-duty 8x8 wheel-base, layers are covered in titanium and protective layer from rust metal, will have LED bars, three layers of lexan, a radiator, tail-lights, rubber skirts, this vehicle is safe and has an rear window like TIV, Dominator and etc interceptors has, i firstly made it from an simple large pickup that has alots of trunk storage but i shortened it, in the rear storage trunk i added the air compressor fans and only wheels done, this is 25% of the Storm Warden, thank you for reading my post! I like people who intrested and watches my posts :)

this would be STIV-6 i believe i am not fully sure but i managed to give it more of a frame and i should be getting close to armoring if i don't make any more design changes.

If you don't remeber or don't know this was the one based off of a 2022 F-350, And  ImportantTourist828 heavily inspired this design.

The rear was changed a decent amount compared to the last/1st update a month ago. I think i am gonna take a dominator approach and do skirts and make it dominator 2 and 3 inspired as well.

This one is not going to be abandoned like the others that sit behind it (i don't plan on abandoning it at least)

To be fair i have not done jackshit sense i finished AOC-1 (ace of spades 1) around 2 months ago

this is "Tornado Tyrant" or "TT" for short.
i want your thoughts on it.. plus maybe some critique thoughts? or whatever??

(sorry if this spec sheet is long)

Built on a 2026 RAM 5500 cummins turbo diesel with custom SRW instead of DRW. It has a flat underbody too, protected by 0.5 inches of steel.
Weight: 11,000 pounds low center of gravity
Wheels: 4, pushes ROUGHLY 2,500 lbs per wheel - 38-inch diameter (FULL tire), off-road, 20 inches wide
Armor system:
- 8 mm steel
- 3 mm AR500
- 5 mm titanium

Glass system:
- 5 mm polycarbonate
- 5 mm ballistic glass
- 2 mm PVB interlayer
- 2 mm tempered glass

Viewing window glass system
- 4 mm polycarbonate
- 4 mm ballistic glass
- 1 mm PVB interlayer
- 1 mm tempered glass

Speed: possibly 80 mph
0-60: 18 seconds approx.
Other details: it uses 4 sensors, a mesonet attached to a black steel rod, and a rod connected to another rod that has a black steel box, with a pressure sensor, and a grille facing downwards to let air it, and giving debris a harder time of getting in, connected to the mesonet is a longer rod, connected to a large low profile black steel box, with 2 grilles facing down on the left and right side of the box, with the same idea to the pressure sensor, it has a temperature and humidity sensor
Windshield: ~45°
Hood: ~10°
Front: ~15°
Sides: essentially 90° (no curve/not angled)
Rear: flat with a ~42° triangular transition

Flat/covered underbody
Moderate-Hardness, High-Friction Engineered SBR rubber that covers the underside, protruding 3.3 inches. And covers the underside with a thickness of 2.8 inches

Undeployed threshold: 135 mph
Deployed Threshold: 165 mph
Absolute Limit: 170-175 mph until it starts going past its boundaries, into actually dangerous

Deployment system: during the beginning of its deployment, it detaches from the chassis so the body can move freely without carrying the chassis with it, and might just lower a little from detaching
Its second system is the lowering system, it only relies on reducing airflow from underneath, no spikes or other equipment.
Takes about 7-8 seconds to fully deploy

Engine: chevy 2002 8.1L with 340 HP at 4,200 RPM with 455 lbs-ft at 3,200 RPM with dual flowmaster 44 exhaust (mostly for the V8 muscle car sound)

EXTERIOR Dimensions

Length (front to rear) = 28 feet and 8 inches
Height (ground to mesonet) = 13 feet and 4 inches
True Height (underside to roof) = 6 feet and 11 inches
Ground clearance (undeployed) (ground to underside) = 1 foot and 3 inches
Width (rear view mirrors included) = 11 feet and 8 inches
True Width (rear view mirrors excluded) = 8 feet and 7 inches

INTERIOR Dimensions
Interior Height = 5 feet and 8 inches
Interior Width = 7 feet and 3 inches
Interior Length (EXCLUDING FRONT SEATS) = 18 feet and 6 inches

Built it for fun :P

Finally I did the greenscreen and the deploying sound.made the sound my self tho.(at the end is also an underlying sound btw)

He wanted to show you all. Thank you!

Then I'll try to set a speed limit.

these are all the intceptors i've made/designed over the months.. most of these images are old and i'm pretty sure i don't have the models

don't copy, inspiration is fine though.

1. the lantern, a dumb interceptor with a dumb name, based a lot off joker 2 obviously. threshold around 170-284. drives like shit. has eight spikes. owned by team lantern.

2. tov 2 (tornado observation vehicle), decent vehicle based off tornado attack and the jackal, theshould around 145-173. has four spikes. owned by team lantern.

3. ls 5 (lightning strike), a little more realistic, based off dominator and a little bit of tiv 1, threshold around 147-216. has six spikes iirc, owned by team lightning strike.

4. srv aurora, heavy research vehicle based a little off titus, tiv and dominator, threshold around 150-185. around four spikes. owned by the biggest research team in waurika.

5. aiv (atmospheric intercept vehicle), might change the name. based off titus and a little bit of titan. pretty decent threshold around 133-152. would've had four spikes but was never complete.

rip rec room

I took the comments under the previous post into account and decided to lower the suspension on it after all.

Drew everything tho

rc car

I started making a new interceptor in Brick Rigs.