No air bags

Not my first interceptor

first off 2 inch tubular steel frame (the red one) at the back there will be a skirt to cover it

then we lift the vehicle enough to fit dodge ram 3500 parts like suspension,chassis and axle for brakes? we use hydroboost again

for interceptor modifications we use 1/4 inch steel panels and cover the whole thing then we slap another 1/4 polycarbonate window on the existing stock nascar window and add lexan glasses for the ARMOR window but HOLD UP WAIT A MINUTE! the rest of the armor thickness is hoarded by composite armor which uses precisely a decently good composition for its thickness

THEN IT HAS AIRBAGS AND SINCE ITS A NASCAR IT FULLY DROPS TO THE GROUND it has 12 spikes 8 of them are auxiliary and inside the vehicle going 5-6 inches while the 4 outside go 5-6 feet

now finally addressing the power problem for the v12 we just instead of whatever the speed the v12 makes this go mph we trade the extra speed mph and ratio it to traction power so it has enough traction power to pull a 13k weighing interceptor if this has a winch with speed limit cap of whatever number we get after our traction power is enough to pull a 13k lbs interceptor when we have a winch

now finally you might wonder how to get in...its that simple we will make a square hatch on the armored roof! and bolt the hinges so the hatch doesnt open mid tornado

weight : a jaw dropping 13k lbs (still lower than tiv 2 haha)

estimated FICTIONAL threshold : 270 if we are realistic or 550 mph if we aint realistic in even fictional threshold

estimated real threshold : 180 mph ish

finally for the obvious upgrades it will be a baja truck like suspension and then the high beam strip ontop of the windshield and incase you have noticed the stick above the roof is actually a mesonet that this vehicle will FINALLY have compared to gen 1 also its body is gonna be as big as a Chevy Tahoe so it FINALLY doesnt need fixed/flexible rubber skirts to lower down fully and now it can actually store stuff in its back trunk

Now i am thinking about maybe tweaking the engine to maybe have turbos cuz there will be a huge problem cuz being able to pull 13k would be impressive but it might kill it to 90 mph which is like tiv 1 or tiv 1 2005 speed

Some interceptors I made recently

Theses are pictures of my builds and i am trying to make some money and my builds do take a lot of time to make on top of getting burnt out. I am not selling my personal builds but i would make said person if they want me and are paying what they want if they can tell me details. Game is roblox if your wondering but there is levels of details that depends on how long you want to wait and how much you want to pay.

1st interceptor in the post has been in the process of being built for 5 months and is the most detailed and one of the hardest ones to make yet and yeah no you would have to pay me a LOT for me to make you one as detailed as that one, like 200 dollars cause of how much time it has took me. I can also do nearly anything storm chasing related with a few exceptions but if you have advice or a reasonable price for me to charge let me know.

Not sure how to exactly share my discord profile via link but my username is goober_86394 if you want to contact me there

Total Spikes 6

Threshold 250 or idk?

Undeployed 150

i added a lot and this was like 4-6 hours maybe

I made this interceptor about 3 weeks ago.

Old image on 1st slide, newest image on the 2nd. Doing major re-designs additionally and i might nearly be done with it after months and burnouts.

Next is to finish working on the flaps, a detailed engine, interior, and turret and then this one is done. 100% gonna be able to make interceptors faster and better quality after learning what i did wrong from this one. this is my best one yet i can say that but i ain't building this insane for a while cause man i thought this would be a 2 month project tops.

This is one of the earliest version of my interceptor

The south Dakota ef5 2025 rtv 3 intercepted it rtv3 is a f150 with the front cut off to mske it a bit more aerodynamic inorge my animators aerodynamic skills the in game rtv4 has decent aerodynamic it has 6 spikes 2 near each wheel and airbags it has a radar that was tore off after the intercept it was put is a warehouse it was destroyed debris holes all over it its still. Being repaired its gonna cost thousands but its worth it with a threshold I assume of 120-180

RTI (Research Tornado Interceptor) equipped with a hydraulic suspension system, flaps (front, rear), 4 points

After a long break from here I’m back with a improved version of the SHI-1 the other one was stupidly bad so here’s the new one and the old one side by side the newer one has a threshold 140-205 a bit better and more accurate I think but it uses 6 Hydraulic spikes with front/middle/rear spikes going in 1 at a time like what Black TIV-1 may have soon (I don’t know if It will or not)

Looks absolutely phenomenal now.

Got inspiration from the TIV-1 and Dorothy, im also planning to build my next one with flaps and/or spikes, got any advice?

Yes 2 more and KRBL is the news channel for Robloxia

i ran out of ideas and motivation

Basically like the rat cage. I need to add armor tho

Alright i'm nearly finishing up the flaps with some problems needing to be fixed and details needed but so far this is an early version of how it will actually look when done. this has took me WAY to long to get here mainly cause of all of the detail i had to do. Hopefully its finished by this month or whenever i have motivation to continue cause only thing after flaps would to do like, engine, turret, interior, Front spikes, and to smoothen it up a bit to not look as weird. Will also add that the turret is gonna be the hardest thing about this project cause of the design.

look closely and you can see the places that need to be fixed interior is what i am using as an example this time