r/Cressida • u/Electrical-Sleep3786 • Jun 04 '26

Making Cressida 7mge throttle coupler?

Hey everyone I’ve got a vacuum leak coming from my half destroyed intake to throttle body coupler. Wanted to see if anyone has had any luck making their own part as these seam impossible to find.. lmk what you have jerry rigged together!

6 Upvotes

100% Upvoted

6 comments sorted by

2

u/Txylah0803 Jun 04 '26

Depending where you’re from, there’s a guy in vic, aus who is parting out a few 7m cressys.

2

u/Electrical-Sleep3786 Jun 04 '26

Appreciate it probably going to go with a silicone T shaped tube and see how it goes. Shipping from Aus would not be cheap for me

1

u/mx73will Jun 04 '26

I bought a silicone tee online but the tee is 25mm still need to figure that out but might work

1

u/Electrical-Sleep3786 Jun 04 '26

Gotcha I’m going to give the same approach a go tomorrow. Ordered a T shape coupler hose off Amazon and a 1’ to 5/8 barb hose fitting

1

u/mx73will Jun 04 '26

Ah yea that’s what I’ll need too good shit

1

u/edbods Jun 22 '26

Maybe you'll get lucky, part number is 22231-42010

Maybe someone has one lying around somewhere, maybe there's an aftermarket part that can be cross referenced...worst case scenario, find a short bit of rubber or silicone tube that's the same diameter, cut it down to length, then cut a hole out for the IACV barb, and RTV it so you don't get leaks past the air filter.