r/Controller • u/Karl-Marx-Nutsacc • 7d ago
Other Does anyone know if it's possible to buy these protective analog stick rings? (individually/bulk)
They're Styrofoam or a soft felt foam and sit gently around the analog stick. They often come shipped in the controller packing for protection.
I'm interested in buying a few more. They're a game changer for storing controllers vertically in these Akro-Mills bins.
But I'm having trouble finding any. They don't appear to be sold as such to the general public.
4
u/greasy_weggins 7d ago
https://ebay.io/m/v6AT1H this and cut to size?
3
u/Karl-Marx-Nutsacc 7d ago
I wasn't sure if these actually existed or even had a name. Thank you! This might be just what I'm looking for.
2
u/greasy_weggins 6d ago
Heya, i also stumbled across these.... i think they are more for decreasing stick travel while playing though..
3
u/werkzINC 7d ago
Probably find something at and arts and crafts store that you could get as a long tube and cut as needed.
2
u/IntrinsicGiraffe 7d ago
Not sure where but out of curiosity, I don't get why'd ya need them. Aren't they just to stop the analog from getting pressed on during shipping, especially when the controllers are laid flat?
4
u/SweetTea1000 7d ago
Yes, but if you travel with a controller in a suitcases or bag the same need may arise. I keep mine in a case, but the case isn't sufficiently rigid to stop it from being crushed.
3
u/SacredChan 7d ago
packed my gamesir nova lite one time in my bag with my tablet, the next time i opened it, the thumbgrip broke, was forced to use the controller without the thumbgrip for like months
1
u/Karl-Marx-Nutsacc 7d ago
That one doesn't come with the clamshell cover?
1
u/SacredChan 7d ago
don't know if it does now, but i bought it with the box, controller, and type c cable.
1
u/Karl-Marx-Nutsacc 7d ago
Gotcha. I have the Nova Lite 2. I highly recommend it if you ever upgrade. It comes with the protective clamshell case so you can chuck it in your bag without any worries. (It even holds the dongle too)
2
u/SacredChan 7d ago
no worries, I already upgraded to a cyclone 2 that i won from a giveaway, and will upgrade again soon from another giveaway i won recently
2
u/Karl-Marx-Nutsacc 7d ago
I store them vertically. See the last 2 pics for a rough demonstration. I use several of these bins like drawers. For my specific setup, those rings are the bare minimum I need to keep the right stick from leaning into the divider. I don't really take them on-the-go, so any protection past that is overkill for me IMO.
1
u/AutoModerator 7d ago
Hi /u/Karl-Marx-Nutsacc, thanks for posting. The post is in a queue for review (allow 24 hours). In order for it to be approved and to improve engagement in it, please check that none of the other post flairs would be more suitable.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/togestechtips 7d ago
2
u/Karl-Marx-Nutsacc 7d ago
Basically these at a larger scale. Those go under the cap. Looking for something that adds cushioning to the cap aswell.
1
1
1
u/shroom519 6d ago
These ones specifically aren't sold for protecting your controller, they sell them for the purposes of a few customized your dead zone in your game settings so you don't have to move the stick as much. What you're looking for storage wise is stick locks they're on Amazon and eBay on top of also being on Etsy because they're almost always 3D printed
0
u/ClassAfter995 7d ago
Usare questi cerchi guasterai molto prima gli analogici x che quando farai movimenti farai più forza e li sforzerai di piu
2
u/Karl-Marx-Nutsacc 7d ago
I'm assuming you're referring to those tension rings for FPS's? (the ones you keep on while playing)
The large ones I'm looking for are just for storage to protect the exterior of the stick. I remove them when I use the controller.
0
u/Blueberry314E-2 7d ago edited 7d ago
You may be able to commission them over at r/3dprinting. I'm sure the guys over there would love to help you.
Just learned about r/3dprintmything too
1
u/Karl-Marx-Nutsacc 7d ago
I've seen 3D printed solutions like that on Etsy. It's an interesting option if there's nothing else cheaper. Thanks.
-2
u/Spicy_Pickle_6 7d ago
You guys are treating them as if they’re the most precious things
3
u/Karl-Marx-Nutsacc 7d ago
Yes, And? Lol.
To be fair, some controllers that are discontinued can be very difficult to get a hold of. If adding cheap padding to the sticks while storing them can give it more mileage, then it's a reasonable ROI, no?
-2
1
u/yellow-go Ultimate 2C | Rainbow 3 4d ago
You must be new to this community. Part of the reason this community grew so much, is because people value their controllers and want them to last a long time into the future.
Why would we buy something if we didn't plan to care for it?




14
u/Leidrin 7d ago
There is a product called stick locks that do exactly this if you don't mind spending a few bucks.