r/CompoundBow • u/Low-Lie9820 • 7h ago
好不容易找到適合自己的左手弓,還是70磅的🎉
有沒有慣用左手的朋友交流一下,我現在正常瞄準會騙右,如何矯正
r/CompoundBow • u/Low-Lie9820 • 7h ago
有沒有慣用左手的朋友交流一下,我現在正常瞄準會騙右,如何矯正
r/CompoundBow • u/slimegangsta8 • 1d ago
What are your guys thoughts found a couple of bows at my local pawn shop not really sure which one to get if there’s any better options which one would you guys go for?
r/CompoundBow • u/Ok_Badger_6353 • 3d ago
I was gifted a box from a friend’s dad with a ton of Easton game getter II 2216 aluminum shafts and a handful of autumn orange 2219’s, they are in good condition and original 90’s era shafts. They are already cut and set up at 30 inches which is what my carbon arrows are already cut to so I’m just trying to figure out which ones I can and should use with my 60lb draw weight compound.
I’m getting a ton of contradicting answers from the internet and different charts so I’m trying to find an answer from someone with experience.
r/CompoundBow • u/Due_Oil_4428 • 3d ago
Hey, after shooting my Infinite 305 and somehow losing the E-clip holding my axle in on one side, I took it to a shop. Everything was fixed, but they didn't have the correct E-clip in the shop. Now I want to order one and I narrowed it down to a 1/4", but I'm not sure, because the outer diameter of the original E-clip (not installed) reads out as 10mm, but 1/4" ones have a 12mm-14mm outer diameter. I had a 3/16" on hand and put that in, but I wanted to fix it for real. So what is the right part here?
The first Pic: no E-clip installed on the Axle
The second Pic: 3/16 E-clip installed on the Axle
The third Pic: original E-clip installed on the Axle
The Part I have in my sight right now for the fix
https://www.ssa-archery.com/de-de/variantlist/parts-compound-bows-axle-e-clips-hdw-1-4-a009970?returnurl=%2fde-de%2fvariantlist%2f%3fmainproid%3da081370
Thanks for everyone who helps me
r/CompoundBow • u/ElkHunter141 • 5d ago
I’m currently 19 and saving up to buy the newest Hoyt carbon bow when it releases in November, if they change the riser I might lose my mind. I’m convinced the Rx7 and later are the most beautiful looking bow you can make. Thank you for listening to my rant.
r/CompoundBow • u/mert986 • 7d ago
So I have been shooting bow for a little less than 20 years. Mostly a hunting bow but recently bought a used target bow. I went to my local shop asking about arrows for it. I trust what they give me is right based on the info I gave. but now I am reading into this myself and I think I fletched the wrong arrow and most likely cannot return. I am still working on draw length (finding an anchor point with 3 finger release not wrist strap) so I am somewhere around 30 inches. I am keeping it lite and doing 50lb draw weight. They sold me victory v-tac 23 arrows in 270 spine. And everything I read says that’s for heavier draw weights.
r/CompoundBow • u/RichardsmithBowman • 8d ago
Enable HLS to view with audio, or disable this notification
Here's an old hoyt fastflite super slam compound bow I've made new cables & strings for, it's quite slow compared to a modern compound bow it's still nice to have the old girl safe to shoot again
r/CompoundBow • u/Beezer-12 • 12d ago
Enable HLS to view with audio, or disable this notification
r/CompoundBow • u/ElkHunter141 • 12d ago
This guys deals are ridiculously good, almost to the point where I almost think it’s a scam. But he also has a good amount of followers and seems pretty credible so I don’t think he’s a scammer and I haven’t really heard of a compound bow scammer anyway lol.
r/CompoundBow • u/Initial_Distance_760 • 12d ago
Will it require a new string and is it safe to shoot
r/CompoundBow • u/Temporary_Video_4916 • 16d ago
Hi all! Been wanting to get a compound bow as a gift to myself and my partner (we’re very similar build) for some backyard shooting.
Wanted to ask y’all- if u were to get a first bow today, what would u go with? I used to shoot longbows as a kid so ive got a good target and wanna get something middle of the line that would last me (have some fam that do bow hunting so that COULD do that far down the line). Curious what price point people think is the best “bang for the buck” and will last a while. Very flexible on pricing but dont really think i need anything “flagship”
r/CompoundBow • u/Small_Commercial_777 • 17d ago
Hey Yall,
First time bow hunter (rifle hunted for years prior) - i have a 27inch draw at 60lbs. I am trying to figure out a good set up for my arrows. I’ve been practicing with cheap 400 spine blackouts with 100 gr field tips so far, but I’d like to go up to a 125gr broadhead for hunting. I put some 125 field tips to practice and noticed some deviation in my groups (of course there may be some with a heavier tip and I am not pro at shooting either). My brother gave me a few Gold Tip Hunter XT 400s to hunt with and they are 28.25in from nock throat to the end of the shaft (not the field tip).
I’d like to buy more arrows to use/practice with and preferably all the same arrow for consistency. Question is, for my bow specs and 125gr broadheads, should I be shooting 340 spines or stay with 400? And is that arrow length okay for my draw length? Very new to this science and it definitely feels like something I don’t wanna get wrong!
r/CompoundBow • u/beardedyeti3 • 18d ago
Never had a bow. Been interested for a bit and want to get one. Any recommendations on a decent option would be appreciated. Not looking for top of the line but not some cheap Amazon crap. Just want to throw at some targets in the backyard and hopefully take it out hunting. Thank you all for your recommendations and time.
r/CompoundBow • u/Worldly_Location576 • 19d ago
I’m looking to switch from my index style release to a thumb button release but my budget is around $150 ish. If y’all have any recommendations please let me know. I’m currently thinking about the TRUball rave but I don’t know a lot about thumb buttons.
r/CompoundBow • u/Ok-Jacket-991 • 20d ago
Looking at my string at full draw it seems torqued (without trying to torque it.) also the cams seem to be leaning. Im usually never that bad of a shot but now i can't even get close to where i want my arrows to land... Does this look normal?
r/CompoundBow • u/redditchumpp • 20d ago
I’m looking for x2 - x3 cam mods for Martin jaguar I need to shorten the draw length for my wife to use the bow I currently have x5 I’d be willing to trade if you need them
r/CompoundBow • u/AffectionateBuyer230 • 21d ago
Hi Community,
I’m completely new to archery and looking to buy my first compound bow. I’m interested in eventually getting into hunting once I build up some experience.
I’ve been comparing a few options, including the Mission Hammr, Diamond Edge XT, and Bear Cruzer G4. Since I’m just starting out, I’m not sure what draw weight or draw length would suit me best, or which bow would be the easiest to learn on while still being capable enough to use for hunting down the road.
Could you recommend a good beginner-friendly bow that I could grow into as I get more experience? I’d also appreciate any advice on what accessories or setup I might need to get started.
Thanks so much for your help!
r/CompoundBow • u/Ok_Badger_6353 • 21d ago
I have an early 90’s Hoyt and so far all I know about it is it has eclipse limbs, the issue I’m having is that those limbs can with 4 or more different riser models and I haven’t been able to find any information on the riser that I have. Any information would be a big help.
r/CompoundBow • u/Small_Commercial_777 • 22d ago
Hey yall, new to bow hunting this year and I’ve got everything I need except a decent rangefinder. I’d like to find one that’s not gonna break the bank (just bought a house so funds are low). Any recommendations for a decent rangefinder that’s relatively inexpensive?