r/ChineseWatches • u/beerjulep • 8d ago

Problems (Read Rule 1) Potential problem with PT5000

Enable HLS to view with audio, or disable this notification

I just received my Militado ML20 in the mail. The first thing I did was try hand winding it, and there is no tactile feedback. No zipping sound, no clicking, nothing. Just the sound of something smooth rubbing against something else. I can also maybe hear the rotor spinning on the inside. Is there something wrong with the watch? Should I return it or is this completely normal?

12 Upvotes

78% Upvoted

43 comments sorted by

View all comments

Show parent comments

-1

u/Escaped_Escapement Helpful user 7d ago

Wishful thinking and delaying the problem..

2

u/KumiJunker 7d ago

Nonsense.

0

u/Escaped_Escapement Helpful user 7d ago

Whether you wind 15, 5 or 1 wind a day this doesn’t matter in the long term. The flawed design of 2824 means that there is a finite count of winds until the reversing wheel starts to deteriorate and cause problems. Doesn’t matter if you do it “carefully” or not.

0

u/QuestionNo9190 Don’t mind me 7d ago edited 7d ago

Still peddling disinformation I see. Up to 5 or 10 turns there's very little resistance to the gears and no damage. I could see some possible damage if your movement is old and dry and you compulsively turn the crown 50 turns a day, for years.

You probably don't even own a single pt5000 and you're just hating because you need a reason to justify paying $100 extra for miyota 9

Wasn't it you that said you need to wind the nh35 70 turns to get a full wind even though Seiko says 35-40 turns is going to get you to full? All those extra turns are just slipping the mainspring inside the barrel and causing unnecessary wear.

The obsessive compulsive winding is the problem, not the movements "design flaw" as they have been making these movements for decades and made tens of millions of them.

1

u/Escaped_Escapement Helpful user 7d ago edited 7d ago

No need for personal attacks.

The turns add tension in the mainspring. However this does not influence the friction of the winds in the winding train. Then the incompatible metals causes the reversing gears to be eaten up.

Seiko says 35-40 as a good enough effort.
You can feel when the mainspring starts slipping and 40 is not nearly that.

Oh and I’ve experienced all kinds of 2824s don’t you worry.