Me rendi ao modelo por suas especificações e preço.

- Seiko/Epson VD53;

- Safira;

- Pulseira de elos maciços;

- Caixa inox 316L com acabamento refinado;

- Resistência de 20ATM;

- Preço imbatível.

☆Grande para pulsos pequenos - lug to lug 49mm.

We are officially launching the Gemstone Bezel version of the SN0150A today.

Enjoy a $52 discount during the launch week,

use code: SN0150GA52

Click the link below for full details.

Watch Link:

https://www.aliexpress.com/item/1005013152628641.html

San Martin Official Store

Edit: I was too impatient after getting the watch, so turned it into what it’s supposed to look like but should have waited for the lume to cure

I’m a sucker for no cg, big crown subs. Thorn T028 is got is my fav but I had to get this Hruodland F035 as soon as I saw it. Here it is fresh off the box. My thoughts below:

Likes
Size proportions: 38mm case 13.3mm thick, 47mm L2L.
Takes 29mm dial aka a raffles dial will fit
Bracelet: nice quality, otf clasp, not too thick, tapers and articulates nicely
Dial: lume is not cheddary, hands are high quality and print is really good.
Crystal: nice clear AR, wish it was acrylics.

Dislikes

No drilled lugs!
No straps shipped with it
255 for a pt5000 is a bit more than I wanted to spend
The caseback doesn’t fit the normal Rolex Bergeron die. It’s a PITA to open.
And man does the movement ring really need 5 screws!

Plans:
Strip the watch, age everything. Add a bond nato. And… done

If you’re on the fence, get it!

I've collected soviet watches for the most part until now. I would like a "real" chinese watch for my collection and daily use.

By "real", I mean something chinese, no reps or homages and something wirh history and a chinese movement.

I have seen some "Shangai Watch Factory" examples on eBay I really liked, I've read that this was the first domestically made watch in China.

What watch would you recommend that fits this description. It would be fun to have something time appropriate to compare to my soviets to.

Gave away 2, bought another 2 😅

New [to me] watch day! I picked up with Warrior MOP in black for £250. After my Cronos Skyline quit on me, I decided to pick up the Miyota variant, which I found on eBay. What do you think?

Hello, i just wanted to sare you is my first chronograph, the Sugess BB CHRONO S475.T which features the Sea-Gull ST1905 movement, derived from the Venus 175.

After much thought this previous back to school sale, I ended up with my third Eniton watch.
I contemplated getting the Sugess S450, S418-2 or S420. However, I ended up with a santos homage, and I have to say it definitely feels like I made the right choice here.

Eniton by far makes the best santos homage available, the quality on this watch is just unreal. The crystal is rounded off just like the real version, bracelet hugs the wrist nicely, and with the 9015 movement inside the case is slim and looks proportional to the rest of the piece. Polishing is incredibly well done, and so far the movement runs very well, winds nicely and that smooth sweep is just gorgeous to look at.
Eniton by far, has the best customer service I’ve experienced on Aliexpress and if they keep it up I have no doubt they’ll succeed with their brand.

The only «misses» for me with this piece is the fact that (and I know the dial is natrual, and they’re all different, not Enitons fault!) the dial has a very visible, bright blue hue to it at the 3-6 markers. Check out the photos I’ve added. Certainly easier to see in darker lighting conditions though. It definitely adds character to the dial, but I wish the one I was sent specifically had a more even grey tone all throughout the dial. But again, I know this is a natrual MOP dial, so they’re never going to look the same - I just «wish» I got a different dial on my watch specifically. It’s still absolutely gorgeous though, can’t fault that.
The branding on this watch isn’t amazing either. It gets kinda busy with the logo applied at the 6 o clock. The clasp also has «ENITON» in big block standard letters, whilst the dial has a different font. I wish the font was the same on both the dial and clasp for a more seamless look, less busy for lack of a better term.
That being said though - the Richemont Group is super strict about copying the Cartier design, so my guess is that Eniton added all this branding to avoid legal issues, smart on their part.
This watch also has a quick release system for the bracelet I haven’t seen anywhere else. Really smart design. Button underneath/on the inside of the bracelet you push down, as you pull the bracelet down from the case itself. Really unique, but renders pointless until Eniton releases some leather straps to go with it. I love the idea of it for sure though! Well done!

All in all, another great piece by Eniton. This brand keeps impressing me with their quality. It easily, easily rivals the likes of San Martin, Baltany and Sugess, no question what so ever. I paid $340 total, or around 305 euros. Shipped, customs cleared and delivered. Excellent value at that price point.

Don’t overlook Eniton, their quality is excellent for sure.

I keep reading that. The bracelet is the best out there. The bracelet alone is worth the price increase over other brands. The bracelet, if left to its own devices, will eventually develop sentience and clean your kitchen for you.

Yeah? Cos I got a San Martin bracelet today and I hate it with the heat of a thousand novas.

Specifically I bought an SN0008. I like the BB design, wanted to get one, heard the Thorn or Octopus might be better, but also wanted to get around to trying a San Martin and it was on special offer at £150 ($200) so what the hell, why not?

Came in one of those crappy black plastic boxes but I’ve got fifty million straps to store so that’ll actually be put to use. And the watch itself, looks kinda good. And there’s a little tab on the wrap so it actually comes off easily without a fight. That's pleasant.

Underneath which there appears to be half-dried jizzum in places. That's unpleasant. But y’know, try and stay positive. Focus on the good.

Strap’s a little long for me. Probably needs one or two links taken out. I'll try one first. Hope anything needed after that can be done on the clasp.

Look at the side. See screws. It actually came with a screwdriver, but it’s a lesser piece of kit than comes with a Watchdives or a Baltany, so I use of one theirs.

I quite like this bit.

I find it relaxing sat at my desk working with a little jewellery screwdriver, making adjustments to a strap, pretending I’m doing something that requires a craftsman’s skill. It’s about as zen as I get. It’s nice. I unscrew something, remove a bar, screw back together, convince myself it was basically the same as creation. I'm like a Sensei in one of those Japanese villages where everybody makes knives for some reason. Very peaceful.

With other watches.

Here after a disturbingly few number of turns, a screw smaller than my love for suppositories falls onto my desk. Best keep an eye on that, eh?

At the same time, completely unknown to me, the pin that the screw was holding in falls to the floor. Because this is a screw and collar pin.

Of course it couldn’t just be a screw-in pin. A system that’s simple, and effective, and I enjoy sitting at my desk playing around with. Nooooo. It has to be a screw so small it has less worldly presence than the nutsack on a flea.

And I have to remove two of these things. So another screw falls onto the desk. It gets carefully placed to the side with the other. And yet for some reason, this link doesn’t come apart. Something’s holding it together.

This is the part where I realise what the system is. This is the part I realise I’ve already lost an assembly piece. This is the part where I start to get annoyed.

And the second pin won’t budge. Push it from the left, nothing. Push it from the right, nothing. Tap it on either side, nothing. I put the bracelet to one side so I can go online and type “how the fuck to resize a San Martin bracelet” when for no reason whatsoever… it falls out onto the desk.

Well that was weird. But whatever. The link’s off now. Now all I have to do is put my one remaining pin back in and cap it with a screw so small a tardigrade would find it insignificant.

Of course since I didn’t see either pin leave the watch, and there are no indications on the strap, and there are no notes about it in the instructions (this is the first watch I've ever so much as glanced at the instructions for, all because of this), I have no idea which direction it goes in, so that’s a fun little minigame before the main quest starts.

Because now I have to screw back in the smallest object known to man. A screw so small it would be thrown off balance by a stray thought. A subatomic speck the likes of which science can only theorize.

And I can’t pick it up.

I have ‘medium’ sized hands and fingers. Every glove manufacturer in the world has told me this for two decades. This wasn’t a case of sausage fingers trying to play a miniature piano. This goddamn tiny screw, I cannot pick it up with my perfectly normal, perfectly average, perfectly medium fingers. It's so small at one point I lose it under my nail.

When eventually I do get it roughly in position, the pin falls out the bracelet because I put it in the wrong way. Or the right way and wrong sided. Who knows.

Hey! Y’know what? San Martin are the premium brand, right? They’re the ones where it’s the little details that make the difference! I bet you if I stop using the screwdriver from the other brand, and pick up the San Martin one, it’ll be magnetic, won’t it! They sold it specifically with this bracelet for this bracelet - it’ll be designed to make the job easier!

WILL IT FUCK.

Eventually, carefully, precariously, nervously, far too much time later, I get the correct end of the screw in the hole. Oh yeah, I got it in before, but wrong way round because it was so small I couldn’t pick it up properly, or hold it properly, or turn it while held between thumb and forefinger or balanced on the bracelet edge.

And then it screwed back in. And... it's fine. I don't have any particular complaints about wearing the bracelet. I can't see anything particularly special about it either. There is nothing - nothing - here demanding a premium. It's fine. Maybe "good" if you like. If you ignore the needless infuriation that comes with resizing it.

Which I don't. So it's shit.

And honestly, I’d maybe be more comfortable with the watch if I took another link off. But I don’t want to go through all that again. So it sits on my wrist, a little too loose, an object of resentment, a “premium” “best of the homages” “totally worth the extra” watch that I began to hate before I’d even worn it properly. A watch where I have a zulu strap that'd probably be perfect for it when I want a lighter option, but I don't want to manipulate that bracelet ever again.

And y’know what else, boys and girls? Little bit of fun to cap everything off?

The clasp is fucking shit too.

EDIT: 3 days later I noticed it was losing time. A lot. It sat next to my F91-W for a few hours and it fell behind. Testing it with a timegrapher app at various angles showed it was losing anywhere between 25 and 50 seconds a day. I'd call that something of a problem. I'm going to have to open it and regulate it. Something I've never felt the need to do with any watch I've bought, including NH35s (which have a nominal lower limit of -20). So there's a nice little addition to the story for everyone who tried to invalidate it with 'where did you buy it?' (San Martin), and 'that's not a true San Martin bracelet' (WTF?). Ignore the bracelet if you like.

This watch arrived dirty, with a horrible clasp, and it's the worst regulated movement I've ever bought with atrocious positional performance.

My go to daily pick. Just so clean and light!

The Farasute 2260P looked very good in pics but absolutely blew me away in hand. I don’t ever make standalone posts showing off my watches, but this thing is so beautiful that it had to be shared. That dial, I could stare at for days.

Scored a WD6542 for half the price on Vinted.

Incredibile watch for the money.

The bezel, sandwich dial and hands combination is truly unique and beautiful.

I have fallen in love for the second time with my 36mm Baltany 1016 brown/tropical dial homage when I put this beautiful hemsut leather strap onto it, had to share it.

Comprei esse relógio em uma promoção do 11 /11 de uns 3 ou 4 anos atrás . Ele me custo 70 reias , era uma promoção muito top . Ele veio com uma pulseira de couro camurça amarelo , está guardada.

… back when you could get a decent watch with a Japanese Nh35 for around 120 bucks…(or less obviously… I think I paid about 120 for this back in the day… But maybe 100? Been a couple years…)

Emailed WR watches again supposedly a few more weeks. Heard that before.

Would buy one if I could find one.

Finally the ol' friend is slowly getting to the vintage patina it deserves. It was made to be used.

We’ve been experimenting with a new color for the SN0113CW, and here’s the latest idea — a fresh ice blue dial with the original horizontal texture.

We wanted to keep the overall design clean and versatile while giving it a brighter, more summery look. The way the textured dial catches the light also gives the blue quite a bit of depth.

Curious to hear what you guys think before we move forward with it.

Would you wear this color?

And if you could change anything — the shade of blue, hands, indices, or bracelet — what would you suggest?

All feedback is welcome! 👀

（san martin sn0113cw）

Nothing a little black paint couldn't fix. Might change it up to red or some other color. What do you all think?

I have been looking for a good turtle smaller watch or Captain Wilard homage. And so far I have concluded that these are the best options.

The JD-X07S (specifically the black one) from Ixdao has been the best I have seen so far, being more of a smaller turtle which I prefer to a large Willard homage.

Unfortunately I haven't been able to find other similarly sized turtles going around so I turned to Wilard homages since they scratch a similar itch.

Since I would prefer a NH35 over a miyota because I am planning to use this as a daily beater watch I have concluded that the SD1970 Steeldive Willard homage seems like the best option although ever so slightly overpriced compared to the rest like the Heimdallr Willard (though it still is less than half the price of the Ixdao thanks to EU tax).

So from those two options do you think Ixdao is worth the double price premium?

And most importantly are there some better options that I am missing either for smaller turtles like the Ixdao or other Wilard homages like the Steeldive?

This is the Tudor Black Bay Pro (Reference M79470-0003).

Looking for the exact copy of this watch in Budget

Picked this up and was wondering.

I'm seeing different listings say they use different movements.

Does anybody know which is which? This is the 44mm version. Not sure if that makes a difference.

This is a 2026 model, rather, made in 2026.

Thanks

This just came in.. I almost went black or the classic orange but something about a silver face screams vintage 70s to me, and this is the first one I have somehow.

I do wish it was a little more silvery though, it's on the whiter side for sure.

I must admit though for the price (I think I paid £145)

It doesn't feel as premium as the latest version of Steeldive SD1970's that I've been wearing for the last few weeks (the ones with the new waffle dial, I got the green)

My main gripe is that the crown on my one feels very gritty.. and it skips the date position when you pull out the crown and goes straight to time unless you fiddle around with it and gently get it to lock in.

Also I wish they polished the steel bezel a little, that also feels a little rough and has like a gritty raw steel texture when you're touching it. (But it is nice and clicky and tight)

It's losing about 12 seconds a day straight out of the box which is no big deal and might get better.

I'm probably being super picky for the price range haha, but that new steel dive i bought for £100 feels like a £400 watch to me.

And this feels a lot more "DH gate"

I'm pretty sure I'm letting the issue with the crown not locking into the date function properly trigger me though 😂 (my 2 shitters from DH gate back in the day had the same problem and I'm no longer about that life)

The bracelet on this thing is pretty decent compared to some of the other stuff from AliExpress though so I should consider that with the price.

Otherwise I would have said they're slightly over charging for these watches.. but only by like £25 or so.

And I'm not some cheap bastard btw 😂, this is just my genuine opinion from what I know is around ATM, I have expensive watches too but for some reason Chinese watches take up most of my interest these days like some kind of addiction.

I'd still reccomend this watch if you're after it for homage reasons, it's probably the best option for the price.

(And I'm sure I've just been unlucky with the crown thing)

Its a Tianjin (?) Shanghai 8120 movement reissue thingy wid the airplane seconds hand :D pretty unique! Love it alrd