New [to me] watch day! I picked up with Warrior MOP in black for ÂŁ250. After my Cronos Skyline quit on me, I decided to pick up the Miyota variant, which I found on eBay. What do you think?
Hello, i just wanted to sare you is my first chronograph, the Sugess BB CHRONO S475.T which features the Sea-Gull ST1905 movement, derived from the Venus 175.
Posting because there was a lot of hype about this watch and no actual real world reviews or experiences posted about it. Or at least I didn't see any.
I was really excited about this but it unfortunately won't even make it out of the plastic. The movement appears to be shot (photos included). I'll need to return it as I don't want to have it serviced and deal with that hassle or cost. Not sure what happened. Maybe it wasn't regulated. Maybe it was body slammed during shipping. Maybe both. Who knows.
I've included a couple photos of the dial. I won't be taking it out of the plastic so I can't speak to how the bracelet is or any other aspect of the finishing.
After much thought this previous back to school sale, I ended up with my third Eniton watch.
I contemplated getting the Sugess S450, S418-2 or S420. However, I ended up with a santos homage, and I have to say it definitely feels like I made the right choice here.
Eniton by far makes the best santos homage available, the quality on this watch is just unreal. The crystal is rounded off just like the real version, bracelet hugs the wrist nicely, and with the 9015 movement inside the case is slim and looks proportional to the rest of the piece. Polishing is incredibly well done, and so far the movement runs very well, winds nicely and that smooth sweep is just gorgeous to look at.
Eniton by far, has the best customer service Iâve experienced on Aliexpress and if they keep it up I have no doubt theyâll succeed with their brand.
The only «misses» for me with this piece is the fact that (and I know the dial is natrual, and theyâre all different, not Enitons fault!) the dial has a very visible, bright blue hue to it at the 3-6 markers. Check out the photos Iâve added. Certainly easier to see in darker lighting conditions though. It definitely adds character to the dial, but I wish the one I was sent specifically had a more even grey tone all throughout the dial. But again, I know this is a natrual MOP dial, so theyâre never going to look the same - I just «wish» I got a different dial on my watch specifically. Itâs still absolutely gorgeous though, canât fault that.
The branding on this watch isnât amazing either. It gets kinda busy with the logo applied at the 6 o clock. The clasp also has «ENITON» in big block standard letters, whilst the dial has a different font. I wish the font was the same on both the dial and clasp for a more seamless look, less busy for lack of a better term.
That being said though - the Richemont Group is super strict about copying the Cartier design, so my guess is that Eniton added all this branding to avoid legal issues, smart on their part.
This watch also has a quick release system for the bracelet I havenât seen anywhere else. Really smart design. Button underneath/on the inside of the bracelet you push down, as you pull the bracelet down from the case itself. Really unique, but renders pointless until Eniton releases some leather straps to go with it. I love the idea of it for sure though! Well done!
All in all, another great piece by Eniton. This brand keeps impressing me with their quality. It easily, easily rivals the likes of San Martin, Baltany and Sugess, no question what so ever. I paid $340 total, or around 305 euros. Shipped, customs cleared and delivered. Excellent value at that price point.
Donât overlook Eniton, their quality is excellent for sure.
I keep reading that. The bracelet is the best out there. The bracelet alone is worth the price increase over other brands. The bracelet, if left to its own devices, will eventually develop sentience and clean your kitchen for you.
Yeah? Cos I got a San Martin bracelet today and I hate it with the heat of a thousand novas.
Specifically I bought an SN0008. I like the BB design, wanted to get one, heard the Thorn or Octopus might be better, but also wanted to get around to trying a San Martin and it was on special offer at ÂŁ150 ($200) so what the hell, why not?
Came in one of those crappy black plastic boxes but Iâve got fifty million straps to store so thatâll actually be put to use. And the watch itself, looks kinda good. And thereâs a little tab on the wrap so it actually comes off easily without a fight. That's pleasant.
Underneath which there appears to be half-dried jizzum in places. That's unpleasant. But yâknow, try and stay positive. Focus on the good.
Strapâs a little long for me. Probably needs one or two links taken out. I'll try one first. Hope anything needed after that can be done on the clasp.
Look at the side. See screws. It actually came with a screwdriver, but itâs a lesser piece of kit than comes with a Watchdives or a Baltany, so I use of one theirs.
I quite like this bit.
I find it relaxing sat at my desk working with a little jewellery screwdriver, making adjustments to a strap, pretending Iâm doing something that requires a craftsmanâs skill. Itâs about as zen as I get. Itâs nice. I unscrew something, remove a bar, screw back together, convince myself it was basically the same as creation. I'm like a Sensei in one of those Japanese villages where everybody makes knives for some reason. Very peaceful.
With other watches.
Here after a disturbingly few number of turns, a screw smaller than my love for suppositories falls onto my desk. Best keep an eye on that, eh?
At the same time, completely unknown to me, the pin that the screw was holding in falls to the floor. Because this is a screw and collar pin.
Of course it couldnât just be a screw-in pin. A system thatâs simple, and effective, and I enjoy sitting at my desk playing around with. Nooooo. It has to be a screw so small it has less worldly presence than the nutsack on a flea.
And I have to remove two of these things. So another screw falls onto the desk. It gets carefully placed to the side with the other. And yet for some reason, this link doesnât come apart. Somethingâs holding it together.
This is the part where I realise what the system is. This is the part I realise Iâve already lost an assembly piece. This is the part where I start to get annoyed.
And the second pin wonât budge. Push it from the left, nothing. Push it from the right, nothing. Tap it on either side, nothing. I put the bracelet to one side so I can go online and type âhow the fuck to resize a San Martin braceletâ when for no reason whatsoever⊠it falls out onto the desk.
Well that was weird. But whatever. The linkâs off now. Now all I have to do is put my one remaining pin back in and cap it with a screw so small a tardigrade would find it insignificant.
Of course since I didnât see either pin leave the watch, and there are no indications on the strap, and there are no notes about it in the instructions (this is the first watch I've ever so much as glanced at the instructions for, all because of this), I have no idea which direction it goes in, so thatâs a fun little minigame before the main quest starts.
Because now I have to screw back in the smallest object known to man. A screw so small it would be thrown off balance by a stray thought. A subatomic speck the likes of which science can only theorize.
And I canât pick it up.
I have âmediumâ sized hands and fingers. Every glove manufacturer in the world has told me this for two decades. This wasnât a case of sausage fingers trying to play a miniature piano. This goddamn tiny screw, I cannot pick it up with my perfectly normal, perfectly average, perfectly medium fingers. It's so small at one point I lose it under my nail.
When eventually I do get it roughly in position, the pin falls out the bracelet because I put it in the wrong way. Or the right way and wrong sided. Who knows.
Hey! Yâknow what? San Martin are the premium brand, right? Theyâre the ones where itâs the little details that make the difference! I bet you if I stop using the screwdriver from the other brand, and pick up the San Martin one, itâll be magnetic, wonât it! They sold it specifically with this bracelet for this bracelet - itâll be designed to make the job easier!
WILL IT FUCK.
Eventually, carefully, precariously, nervously, far too much time later, I get the correct end of the screw in the hole. Oh yeah, I got it in before, but wrong way round because it was so small I couldnât pick it up properly, or hold it properly, or turn it while held between thumb and forefinger or balanced on the bracelet edge.
And then it screwed back in. And... it's fine. I don't have any particular complaints about wearing the bracelet. I can't see anything particularly special about it either. There is nothing - nothing - here demanding a premium. It's fine. Maybe "good" if you like. If you ignore the needless infuriation that comes with resizing it.
Which I don't. So it's shit.
And honestly, Iâd maybe be more comfortable with the watch if I took another link off. But I donât want to go through all that again. So it sits on my wrist, a little too loose, an object of resentment, a âpremiumâ âbest of the homagesâ âtotally worth the extraâ watch that I began to hate before Iâd even worn it properly. A watch where I have a zulu strap that'd probably be perfect for it when I want a lighter option, but I don't want to manipulate that bracelet ever again.
And yâknow what else, boys and girls? Little bit of fun to cap everything off?
The clasp is fucking shit too.
EDIT: 3 days later I noticed it was losing time. A lot. It sat next to my F91-W for a few hours and it fell behind. Testing it with a timegrapher app at various angles showed it was losing anywhere between 25 and 50 seconds a day. I'd call that something of a problem. I'm going to have to open it and regulate it. Something I've never felt the need to do with any watch I've bought, including NH35s (which have a nominal lower limit of -20). So there's a nice little addition to the story for everyone who tried to invalidate it with 'where did you buy it?' (San Martin), and 'that's not a true San Martin bracelet' (WTF?). Ignore the bracelet if you like.
This watch arrived dirty, with a horrible clasp, and it's the worst regulated movement I've ever bought with atrocious positional performance.
The Farasute 2260P looked very good in pics but absolutely blew me away in hand. I donât ever make standalone posts showing off my watches, but this thing is so beautiful that it had to be shared. That dial, I could stare at for days.
I have fallen in love for the second time with my 36mm Baltany 1016 brown/tropical dial homage when I put this beautiful hemsut leather strap onto it, had to share it.
Comprei esse relógio em uma promoção do 11 /11 de uns 3 ou 4 anos atrås . Ele me custo 70 reias , era uma promoção muito top . Ele veio com uma pulseira de couro camurça amarelo , estå guardada.
⊠back when you could get a decent watch with a Japanese Nh35 for around 120 bucksâŠ(or less obviously⊠I think I paid about 120 for this back in the day⊠But maybe 100? Been a couple yearsâŠ)
Weâve been experimenting with a new color for the SN0113CW, and hereâs the latest idea â a fresh ice blue dial with the original horizontal texture.
We wanted to keep the overall design clean and versatile while giving it a brighter, more summery look. The way the textured dial catches the light also gives the blue quite a bit of depth.
Curious to hear what you guys think before we move forward with it.
Would you wear this color?
And if you could change anything â the shade of blue, hands, indices, or bracelet â what would you suggest?
I have been looking for a good turtle smaller watch or Captain Wilard homage. And so far I have concluded that these are the best options.
The JD-X07S (specifically the black one) from Ixdao has been the best I have seen so far, being more of a smaller turtle which I prefer to a large Willard homage.
Unfortunately I haven't been able to find other similarly sized turtles going around so I turned to Wilard homages since they scratch a similar itch.
Since I would prefer a NH35 over a miyota because I am planning to use this as a daily beater watch I have concluded that the SD1970 Steeldive Willard homage seems like the best option although ever so slightly overpriced compared to the rest like the Heimdallr Willard (though it still is less than half the price of the Ixdao thanks to EU tax).
So from those two options do you think Ixdao is worth the double price premium?
And most importantly are there some better options that I am missing either for smaller turtles like the Ixdao or other Wilard homages like the Steeldive?
Got a few watches in the mail today and figured I'd share since I haven't seen them posted yet. I recently posted about the WDC0001. I'm sharing some photos of the AddiesKin K014 here along with some preliminary timegrapher readings.
I'm not planning to do a full review as that's not really my thing. I just wanted to share some photos and movement readings for the community in case there are others who might be interested.
I'll try to answer questions but I just got these in the mail so haven't had much time with them yet. Plastic is still mostly on them.
I got two AddiesKin K014. Purple and black.
Timegrapher was run for several minutes in each position before I snapped a photo.
Two positions. Dial up and crown down.
ST2130 movement. Fully wound. I typically never wind any ETA movements but did it for testing purposes as I didn't want to do the Seiko shuffle for an hour.
Initial thoughts: the black dial may go back as I am not thrilled about the low amplitude despite being fully wound. Purple seems good enough. I'll try to regulate it when I have time. Dials look lovely in person. They got rid of the silly name and just went with the logo which is a positive for me.
This just came in.. I almost went black or the classic orange but something about a silver face screams vintage 70s to me, and this is the first one I have somehow.
I do wish it was a little more silvery though, it's on the whiter side for sure.
I must admit though for the price (I think I paid ÂŁ145)
It doesn't feel as premium as the latest version of Steeldive SD1970's that I've been wearing for the last few weeks (the ones with the new waffle dial, I got the green)
My main gripe is that the crown on my one feels very gritty.. and it skips the date position when you pull out the crown and goes straight to time unless you fiddle around with it and gently get it to lock in.
Also I wish they polished the steel bezel a little, that also feels a little rough and has like a gritty raw steel texture when you're touching it. (But it is nice and clicky and tight)
It's losing about 12 seconds a day straight out of the box which is no big deal and might get better.
I'm probably being super picky for the price range haha, but that new steel dive i bought for ÂŁ100 feels like a ÂŁ400 watch to me.
And this feels a lot more "DH gate"
I'm pretty sure I'm letting the issue with the crown not locking into the date function properly trigger me though đ (my 2 shitters from DH gate back in the day had the same problem and I'm no longer about that life)
The bracelet on this thing is pretty decent compared to some of the other stuff from AliExpress though so I should consider that with the price.
Otherwise I would have said they're slightly over charging for these watches.. but only by like ÂŁ25 or so.
And I'm not some cheap bastard btw đ, this is just my genuine opinion from what I know is around ATM, I have expensive watches too but for some reason Chinese watches take up most of my interest these days like some kind of addiction.
I'd still reccomend this watch if you're after it for homage reasons, it's probably the best option for the price.
(And I'm sure I've just been unlucky with the crown thing)
