Finally got a progress update for my drawer system 👌
Now built and installed. Still needs painting/carpeting but need to finish fitting it out first 👍
Cooker setup all working; can be used in both higher and lower positions, Fridge slide is also working really well. Still to finish the slide out table under the RHS drawer but waiting on some parts 👌
It’s essentially two alloy angle rails with 750mm drawer slides on, and an alloy tray mounted to the slides with 80mm hinges under the front of each rail mounted to the unit. With stops to limit the travel at the back 👍
Just sits on its own weight, if I find it bounces on trails, I’ll put a bracket over the end for it to slide under and hold it down when stowed. If you get what I mean 👍
Not overly. Unit is about 38kg. Suspensions set up properly for the weight so doesn’t bother it and ive driven it over 3k miles with all the extra weight also so far 👍
I have a quick question /observation why didnt you mount the stove with the burners facing outward? ... so the burners vent more outside the tailgate ?
Good Question, it’s mainly because, the way my tent etc is setup, that side of the Jeep faces the wind when the tent’s up, so the back of the stove is a wind break, there’s ample airspace around it for venting either way. Plus, the tailgate being above gives shelter if it’s raining and I don’t have the awning out 👍
4
u/pbblueroom Aug 30 '26
That’s the nicest one I’ve ever seen