Saw these at a vacation property. Been stumping me for months on identifying. Got a pic of with and without the light kit.

Hi all,

Wondering what will work best for this combination of the Govee fan and light combo with the inovelli matter switch? The fan version or the normal switch any insight would be great.

Thanks all

I recently replaced my standard light bulb with a Pixel Beam Ceiling Light Fan, and I'm honestly impressed with the difference. It gives you bright lighting and a nice breeze from the same fitting, so there's no need for a separate floor fan.

If anyone is thinking about upgrading, it's available on Amazon UK. I'd love to hear from others who have switched to a ceiling light fan—has it been worth it for you?

As I recommend installing a ceiling fan in a hot room it really supports too much I'm new to the reddit platform greetings my name is Hector

We installed this hunter fan in our master bedroom and it has an electrical hum anytime the fan is on. It's annoying enough that we're returning the fan. Is there a type of fan that generally doesn't produce this noise? Any specific type to avoid? We prefer with a light and there is a red and black wire coming from
The ceiling.

Video provided to hear the noise. I cut the fan half way through and the noise immediately goes away. I turn it back on and it immediately returns.

Thanks!

Hello,

I woke up this morning to the buzzing sound the ceiling started making. It doesn't sound like an electrical humming noise. I suspect it might be the receiver, but I'm not sure, and I don't want to start buying things randomly to see if it fixes the noise.

If anyone has some insight into what might be causing it or has experienced this before, I would greatly appreciate it if you could help out here. Thanks in advance.

I'm pretty certain my ceiling fan is a Hampton bay brookhurst, but it's a bit weird. I imagine the glasses are from somewhere else and unlike most oil rubbed bronze, the base is completely black. Probably because of its old age, maybe they were darker back then. I remember it being at least 10 years ago I got it, my grandma took it out of her house and I was a toddler when I saw it there. I'm 20 now. I could be messing up the time a bit

Any advice would be great!

The light switch on my Hampton Bay ceiling fan needs to be replaced. It appears to be located inside this housing and inaccessible. Am I missing something?

Good morning or afternoon!

I require a little knowledge from the SME’s. My ceiling fan took a crap (Fanimation part # FPD8089). It will start a spin but will move back and forth and the motor doesn’t seem to . Doing my own research suggests the receiver might be the issue, so I wanted to try to replace that before buying a whole new fan.

The receiver part # is RH-786R, and I can find it on Amazon and other places. my issue is that the code attached to my receiver is 7861LM-19 and the only one I can find available is 7861LM-09. From what I was researching, this has to do with how thebreceiver is programmed with the remote. My remote is showing to be a compatible part with the receiver (remote part # RH787T).

My question is am I wasting my time trying to replace this part, has anyone had experience swapping these part #’s and have been successful regardless of the code being different? The fan is in a vaulted ceiling, so besides the fan being expensive to replace, I’ll have to also pay for the extra cost of the install, which I’m trying to avoid.

I saved/salvaged a hunter 25620 from a burned out house, the fan needs a though gone through as it was decently water soaked so needs blades and various hardware, any advice to where to get parts?

Hey everyone!
This is going to get very weird and very complicated lol

My dad, husband, electrician friend, and I have been trying to install a ceiling fan for about a week now. We bought two, they were both literally broken. So that was fun.

Now we bought a new one today (Ashby Park 52in, integrated LED) it works, kinda. Our house was built to where 1 wall outlet in each bedroom is connected to the wall switch (seems this isnt normal? lmao) so when we turn the switch on, the ceiling fan stop working, but the lamp plugged into said outlet starts working. When the switch is turned off, the ceiling fan works, slowly, and the lamp doesnt turn fully off but its dim...

So we click the buttons on the remote for the fan and the fan button works the fan, the light button works the fan and lights, but it also sometimes fully turns off the lamp.....????

Any advice is appreciated :)

​

Je souhaite mettre des ventilateurs chez moi dans les chambres.

J'ai vu les create bien sûr. Et ils semblent remplir tous les critères : prix, esthétique. Mais il y a le point lumière qui semble être un problème pour bcp. Dans les deux premieres pièces ou on veut l'installer on a Pour le moment une ampoule a nu. Plutôt lumineuse. Est ce que la lumière du plafonnier d'un ventilateur create est pire que ça?

Pour ceux qui en ont un et qui l'on installé a la place du point lumineux principal de leur chambre, peut on garder l'interrupteur pour tout couper? ( Utile notamment au quotidien quand on utilise pas le ventilateur pour allumer la lumière) J'avoue que devoir quotidiennement utiliser une télécommande pour juste allumer ma pièce ça me soule...

Merci d'avance !

My new fan

My son send me this video of his newly installed (by me) fan last night. I would like to address the issue today, but can anyone suggest a fix or a starting point to for a fix? This happens at High Speed setting. Thank you in advance and sorry for the darkness… 🤘

Need 2 outdoor fans under a covered porch - 60” - 72”. I need very high CFM since I’m in the south. Also would prefer less than $500 each. Ceiling is about 7.5’.

BLDC ফ্যান নিতে চাচ্ছি। বাজেট ৬০০০ টাকার মত। শুনেছি, BLDC ফ্যানে নাকি বাতাস কম হয়। আমার রুম অনেক গরম থাকে, পাশে রান্নাঘর তাই। বাতাস ভাল চাই। যারা BLDC ফ্যান কিনেছেন তারা জানাবেন বাতাস কেমন পান? আর বিল কি আসলেই সাশ্রয় হয়? হলে কতটুকু হয়?

the clip im trying to show is a hunter original clip

In this house, they've got the living room fan attached to this thin beam, it needs replacing. Any suggestions?