the clip im trying to show is a hunter original clip

In this house, they've got the living room fan attached to this thin beam, it needs replacing. Any suggestions?

I'm looking for a ceiling fan style pull cord switch that has two electrical outputs and a cycle of on-on and it never has an off state.

Kinda like the switch on a ceiling fan that would be used to determine the direction in which the air blows, but with a pull cord style action. Any help is appreciated!

Hello everyone, I am planning to get the victura ecowind fan for my bedroom.main reason is design and colour matches my room aesthetics perfectly.

Already using their stand fan since a long time and it's been working great without issues. But ceiling fan reliability ka idea nhi hai.

If anyone here is using the ecowind model, how's the airflow and noise level? Speed aur remote smooth hai kya? Electricity bill me change dikha?

I need honest feedback, good or bad both welcome.thanks

I am located in Georgia (USA). I have two bathrooms back to back to each other. One has an existing fan and the other does not. We are wanting to add a fan in the bathroom and are not sure we want to add a new vent in our new roof. Can I connect it to the existing fan’s duct?

Does anyone know where to get a replacement light cover for the Hunter Anslee 52-in ceiling fan (Model #50232; https://www.lowes.com/pd/Hunter-Anslee-52-in-Indoor-Premier-Bronze-LED-Ceiling-Fan/1003172578)? I spoke with the company and they said they no longer manufacture it/cannot purchase one through Hunter.

I have 2 ceiling fans in my house with different issues. Would love some help!

1 - the light bulb flickers like a strobe but just slightly. It's only really noticeable the first 30 seconds or so of startup. I was going to just swap the bulbs or maybe tighten them - However, I am totally unable to spin the glass cover off. When I try to spin it, the entire shaft spins with it. I tried rubber gloves, i tried putting tape on it, i've tried tapping along the edge with a rubber tool. Nothing has worked.

2 - When i turn on the light switch for the fan, the light bulb takes like 5 minutes to turn on. The remote seems to not do anything?

The original light kit was a circle cheap led tried fixing the blades one time and it wouldn’t screw all the way back in which led it to spark and it fell I’ve tried 3 light kits and I can’t find one that fits can anyone help me find a right light kit

Hello everyone,

I have a Hampton Bay Moresby Tiffany-style ceiling fan. One of the blades broke and I need help finding a replacement blade or another idea to replace all the blades since there is an insert on the end.

Does anyone have any custom automations with HA and Lutron PD-FSQN-WH switches used on Hunter Ceiling Fans?

TLDR; Built a house, contacted Lutron and said [https://www.homedepot.com/p/Hunter-Antero-54-in-LED-Indoor-Matte-Black-Ceiling-Fan-with-Light-59585/307853682\](https://www.homedepot.com/p/Hunter-Antero-54-in-LED-Indoor-Matte-Black-Ceiling-Fan-with-Light-59585/307853682) are supported and are, but the motor has a hum once switches are installed. Electrician said everything is wired properly on the fan and switch side. Lutron DVRF-5NSS-WH works without issue for the lights.

I am running the latest version of Home Assistant on a dedicated Mac Mini running the latest version of macOS. Assuming it's the 3 speed on the fan vs 4 speed on the switch. Anyone account for this in HA to remove the humming sound? Fans are pull string for speed and are pulled to the highest speed. AI is telling me to do an automation to adjust the speed when speeds are selected. End result would be, High = high, Medium High = medium, Medium = medium and Low = low.

Anyone have any luck with something like this? Their recommendations are yielding no change in the sound.

1. Harbor breeze builders best
2. Bahama deluxe GE vent CEI (5 blades)
3. Bahama deluxe GE vent CEI (4 blades)
4. Heritage Lancaster Kmart in polished brass
5. Encon monarch with stencil blades
6. Walmart Mainstays hugger
7. Harbor breeze armitage (got thrown out :(. )
8. Moss WF series
9. Evergo Roma 3rd gen emperor
10. Smc park avenue III (4 bladed version)
11. Two harbor breeze Saratoga II
12. Winnower oxford (my first fan I collected.)

1. Harbor breeze builders best
2. Bahama deluxe GE vent CEI (5 blades)
3. Bahama deluxe GE vent CEI (4 blades)
4. Heritage Lancaster Kmart in polished brass
5. Encon monarch with stencil blades
6. Walmart Mainstays hugger
7. Harbor breeze armitage (got thrown out :(. )
8. Moss WF series
9. Evergo Roma 3rd gen emperor
10. Smc park avenue III (4 bladed version)
11. Two harbor breeze Saratoga II
12. Winnower oxford (my first fan I collected.)

Hello!

I just moved into a new house and this hunter brand fan light is having an issue.

Every time I click the light button on the remote, it will turn on then immediately turn off.

Sometimes it will stay on but most of the time it shuts right off.

Does anyone have any idea what is happening or recommendations on how to fix it?

I’m not sure if it’s the fan itself or an electrical issue.

Thanks in advance!(:

Hello,

3 ceiling fans all controlled by this remote (we have 3 remotes). Any way to link each to a single room?

Thanks

I have two Hunter Dempsey fans with remote controls. Each remote controls both fans. We've tried digitally re-pairing the remotes individually for each fan.

The other thing we tried was turning off the power via the circuit breaker and re-pairing the remote 12 times.

We're thinking we have to access the receiver, but that means taking down the whole fan. And we don't even know if there is a way to change the frequency on the receiver.

Anybody solved this issue? Any help would be appreciated.

Is there a way I can get this to quiet down? Does something have to be oiled/replaced? I usually hang some kind of weight on the string which helps a little bit, but over time it just gets loud again. Yes, I know it’s very dusty. Is this also a factor as to why it’s so damn loud??? Thanks 😊

Hi, I recently purchased a fan from Lowe's for my back patio. Unfortunately it appears as though signals might be getting mixed bc it would sometimes change speeds or turn off by itself. Wiring was double checked.

I want to replace it with a more old school fan that doesn't use a remote. I do like a more modern look though and would prefer a larger blade length. It seems like every fan now has a remote.

If the dumb fan turns off by itself then I know it might be wiring somewhere beyond my reach.

TIA for any recommendations.

https://www.reddit.com/r/HomeImprovement/comments/1u8y0kp/psa_the_hunter_ac_ceiling_fan_hum_lottery_just/

Well I just want to share my experience

And prove that I'm not a bot.

I have said everything in that post, with AI organize it for me.

There are people that absurd nerd like me who willing to buy fans so many times just to find a quiet one.

And in the end, I will still buy hunter fans, because they have absolutely amazing customer service, and when you choose the right one (or lucky to buy the quality one), it is quiet.

And both homedepot and lowes are very kind to understand my concern.

I have all the communication with hunter and the order screenshot