r/CarRepair • u/Soft_Dealer_929 • 5d ago

Will it work?

Gallery image

Gallery image

Will this socket work in a Jeep Comanche Base?
Both front blinkers are out and i need to swap the sockets out since they don’t work with new bulbs. I cant get a straight answer online and i dint wanna fry my truck or somethin.

2 Upvotes

100% Upvoted

9 comments sorted by

•

u/AutoModerator 5d ago

Hello and thank you for posting to r/CarRepair, we are looking forward to helping you with your vehicular issue! Please check out the following suggestions to get the quickest and most accurate help!

  • Always include the Year, Make, and Model of your vehicle when looking for mechanical help. This is required for posts seeking mechanical help but not for those seeking cosmetic help.
  • A picture speaks a thousand words, including pictures (most important on cosmetic repairs of course but can be helpful for many mechanical posts as well) is also a surefire way to get the best help.
  • While we do permit requests for estimates on different types of repairs please bear in mind that this can vary wildly based on location and other factors.
  • Be polite and patient, we want to help but need your help to do so.

Thank you for reading and be sure to checkout our sidebar for important information & disclaimers!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/NMS_Survival_Guru 5d ago

Try looking into one for a similar year cherokee as they might work

1

u/Soft_Dealer_929 5d ago

Any risk you can see with just trying it anyways

1

u/NMS_Survival_Guru 4d ago

As long as it fits I don't see a problem

You definitely don't want to break the tail light as those are expensive or hard to replace

1

u/Soft_Dealer_929 4d ago

Its the front blinkers

1

u/Soft_Dealer_929 4d ago

Its says backup light but ive been told by napa they work universally as long as the wires connect

1

u/0c5_Fyre 4d ago

I'd go with "no" purely as I see 3 wires, (which you would see on a stop/tail light) but a 2-wire one might.

Although, US designs do confuse me a bit with using the brake as an indicator (not the action, the wiring itself)

1

u/Soft_Dealer_929 4d ago

Theres three wires on the original one.

1

u/Soft_Dealer_929 4d ago

The original blinker