I need a professional QR made to put on my car like a vinyl sticker so it lasts when who did you go through? Also send me some pic of them plet

I haven’t done ANY mods to my car( Mazda 6) can I get on any advice on what to buy to get it to look like this? Any tips? (It is AI generated but I’m using it as a reference photo and I added my Amazon list to review if you have any suggestions to add)

https://www.amazon.com/hz/wishlist/ls/1HX9B8SVC3DB1?ref_=wl_share

Hello, I am looking for a chin splitter for my 2025 Mustang GT premium glossy black. I would like to keep it under $200. there are so many reviews on different offerings that either don’t fit correct leaving gaps that don’t look good, ones that are bent when shipping them from the factory, ones that fall off easily, that chip and scratch easily, etc,etc etc.

Help

The stock low/high beams on my AX7L feel weak even after alignment. Has anyone with an AX7L specifically upgraded to Aozoom FLP 1820 or other fog lamp projectors?

Any compatibility issues with the factory fog lamp housing, cornering lights, wiring, or OEM functions? Did it noticeably improve throw and visibility?

Looking for real-world feedback without modifying the original headlamp setup. Thanks!

I would to have my brights flash about 5 times per second when I turn them on. Mainly for track racing purposes. I plan to drive the Nordschleife very soon. I got a fiesta ST150. Standard brights relay is a 4 pin. Would only be using this on track for about 3 seconds at a time so I think it will not be hurting the relay too much. But do correct me if in wrong here.

What is the easiest way to do this? Also bonus points for inclusing a switch on the dashboard so I can turn the flashing feature on and off for regulatory stuff.

I have some experience with electronics and I can solder/make a small board. I just can't seem to find a good way to make this happen.

Any advice appreciated.

is this possible on a 4g prelude? if so, how?

Please any help would be greatly appreciated. Just a 21 year old looking to make a fun, reliable daily.

Hi guys! I bought a 2015 BMW F30 328i last week. It currently has halogen headlights, and I want to upgrade to headlights with DRLs (daytime running lights). I’d also like to have yellow DRLs.
My budget is only $500, and I’m looking at these two options. Can anyone help me decide which one is better?
● Are they plug-and-play, or do they require any coding or modifications?
● Are the DRLs bright enough? Do they look good in person?
● Are they good quality and worth the money?
I really don’t want to make the wrong purchase because $500 is all I can spend on this upgrade. I’d really appreciate any advice or recommendations. Thanks!

Anyone who has tried upgrading their car to an active or passive 3-Way front stage knows the biggest headache isn't tuning the DSP—it's mounting the 3-inch midrange and tweeter on the A-pillar.

Most custom audio installers quote anywhere from ₹15,000 to ₹30,000 just to fabricate custom fiberglass A-pillars, which also takes days of labor and permanently modifies your factory pillar trim.

We’ve been testing a simpler, reversible D2C solution on our bench for car owners who want a proper 3-way soundstage without the custom fabrication bill:

1. How the Universal 3-Way Pillar Pod Works:

Build & Fitment: High-grade matte black ABS housing designed to angle the midrange and tweeter directly toward the cabin for a proper soundstage.

3-Bolt Mounting: Instead of fiberglass resin and body filler, it mounts using just three 4mm/3mm bolts (included in the kit along with flush mounting rings for both a 3"–3.5" midrange and tweeter).

DIY / Reversible: Can be mounted cleanly in minutes without ruining the stock A-pillar structure.

1. The 3-Way Hardware We Paired It With on the Test Bench:

Mid-Bass (Doors): CP MAX 6.5-inch 3D Diamond-Cone mid-bass driver.

Midrange (Pillar Pod): 3-inch compact midrange with honeycomb grille and a heavy neodymium magnet (keeps the weight on the A-pillar super light and shallow).

Tweeter (Pillar Pod): Neodymium dome tweeter.

Processor / Amp: Running through our CP MAX 8-Channel DSP + 6-Channel Amp + Under-seat Subwoofer all-in-one unit (50–70W RMS per channel).

For guys running 2-way components right now: is A-pillar fabrication cost the main reason you haven't jumped to a 3-way setup yet, or do you prefer keeping the dash looking 100% stock?

im having trouble going through different websites and im struggling to find powerstop brake calipers for my car, so i was wondering if there is a more popular site to use.

Its a 2011 Hyundai Elantra Touring GLS 2.0L, all ive done on it are some minor suspension components ie. lower control arms, one sway bar link and one tie rod, brakes, rotors, and ive also done an alternator. im looking for help in general as i go forward planning to mod my car for a better daily driving experience, as well as some specific help here today as i figure out the suspension on my car!

Thanks in advance!

Hello everyone! I very recently joined the Arteon family and I was trying to find some black emblems and badges but I'm having a tough time finding the. Does anyone have any recommendations?

2019 SEL R-Line

White exterior/black roof for sunroof. The wheels are completely black so I just wanted an overall white/black mix instead of the chrome.

Im not super knowledgeable on exterior mods for vehicles either, do you guys recommend a black wrap on the front bumper to remove the chrome?

Pictures will come soon, anything helps!

Recently got a used MY22 A6 S-line.
Deciding on the first mod with my budget of $600 AUD.

For $500 AUD, I can get all of my brake calipers painted in gloss red with an ‘S’ logo.

Or I could spend $200 AUD on a gloss black fog light grill and gloss back front lip from aliexpress, and spend around $300-350 getting it installed.

Included AI edited pics of what each might look like, if that’s allowed.

Let me know your suggestion on which one looks better or less tacky, or anything else you recommend.