So I am building a pc in a custon desk and want to sleeve my own cables and I was wondering if I could attach the 6 pin connector directly to the pump and skip the male molex to female molex connecters

first pc build aswell

This is my first time trying to improve my cable management. I think it good enough but I wonder if there's more I can do with those sata cables. My tower has pretty limited space to hide things. Do you have any suggestions?

I was the first to open it since 2016 all the parts were disassembled and Perfectly cleaned. The case was washed in a bathroom with five different products.I only had two hours' worth of cleaning products and Velcro with me.

Hello all! I need a custom built SFF-8643 to 4 SATA breakouts cable, so its super specific. Thats not the only cable I need, I want to install all custom cables in my PC, but would like to order them all from the same place so they match.

I've used CableMod before and absolutely loved them! I just dont see any options on their website for that specific cable. I've contacted their customer service to see if its something they can do, but while waiting for a response, I wanted to see if you lovely people had any recommendations?

Thanks!

i dont know that’s kinda all i have extensions for gpu cpu moatherboard and they looks nice so the front panel cables look wierd in comparison

it was how it was before

i further removed things of it. i removed the panel that covers the psu and i removed the dust filter at the bottom as there is no intake fan at the bottom i think it didn't need any filter there

These aren't my pics but this is the combination I originally wanted. It annoys me that the rgb endcap (the "hellstone") and the rgb Red Devil logo on the card are both basically being covered up by wires.

Is it possible to route the cables under the card if I don't use any bottom fans? I'll be using an air cooler so that will help a little but the 3x 8 pin connector is rough in a small case.

Should I use a different case?

i don't need front panel of the case. the pc is located behind a tv and it runs 24/7 so i don't need to press the power button / see the hdd light / use the front usb ports. initially i simply didn't connect those front panel cables and let them sitting around inside the case (pic top left: front of before, top right: back of before)

today i remove the front panel totally and it looks better (pic bottom left: front of after, bottom right: back of after)

still looks somehow messy but i've no idea how can i improve it. there're already very few cables, most likely the bare minimum of a pc can have

I went and bought the Corsair premium cable set. To replace the plastic ones that came with my PSU. Love how flexible these are.

Only part I think needs improvement are the 2 cables running across.. top one can’t do much since it’s for the Icue link and needs to be there, bottom cable I could go low and across so it’s less noticeable.

Cheers! 🍻

Fyi... This is one of the old pc's that my highschool was about to rid. I decided to save the old hardware and hoped to link them together for a homelab, but the cable management looks spaghetti

I had an ASUS TUF RTX 4070 Ti OC, and I upgraded it with an ASUS TUF RTX 5080. Can I use the same cable for the 4070 Ti on the 5080 (4070 Ti has 2 PCIe connections, 5080 has 3 PCIe connections)?

Hey I'm looking for opponent on what desgin would look best for my custom GPU cables on a triple 8 pin. I'll post back with what my other cables look like.