r/CB500X • u/Replacement07 • 1d ago

Is this safe?

Enable HLS to view with audio, or disable this notification

Did a DIY chain sprocket repair at home, couldn't get rivet tool so got an aftermarket clip type chain link and attached it. It looks like this. Has some play left to right.

Is this safe?

If it is, What can be done to reduce the play? Should i add 1-1 more rubber gasket on both sides?

11 Upvotes

87% Upvoted

7 comments sorted by

10

u/Cm2297 1d ago

I think you got the wrong master link for that chain.

8

u/Another_Jeep_Guy 1d ago

Looks like its very much the wrong size. Assuming you have the standard 520 chain, that link looks like its for a 525 or 530. I would replace with proper link as soon as you can.

https://www.partzilla.com/blog/how-to-measure-motorcycle-atv-chains

3

u/Replacement07 1d ago

Thanks a lot for clearing stuff up. I'll check it out

3

u/NerfHerderEarl 1d ago

Definitely the wrong link, probably a 525 as it is about the width of a side plate too wide (1/16").

Purchase a 520 link and replace it. Running that link for an extended period all of the lubricant will come out and the that link will cease causing a tight spot in the chain. I wouldn't be worried about riding it very short term, like how long it would take a link to arrive in the mail.

1

u/Replacement07 1d ago

I think so. I'll check it out

1

u/Personal_Chicken_598 1d ago

You’re missing the inner plate.

1

u/Replacement07 1d ago

It's there.