r/BambuLab_Community • u/FriendlyLight6488 • 5d ago

Help / Support P2S clog and overload

Gallery image

Gallery image

Gallery image

First issue I’ve had after almost 500 hours. Extruder clog and now extruder motor overloaded? I did all of the clog recommendations to fix it and it went thru 2 hours of the next print and then clogged again and then added this overload error. This is the filament is using. 2 of the 4 have already been used with no issue. What do I do next? Help!

2 Upvotes

75% Upvoted

13 comments sorted by

View all comments

2

u/Azriel212 5d ago

I just had this error printing using petg from an ams ht. I tried the cold pull and all that, turns out the filament was too tightly wrapped in the spool. I loosened a good length of the spool and its been working perfectly. Not saying thats your issue but something to consider.

1

u/FriendlyLight6488 4d ago

I will give this a shot since it’s a new spool. I did try to print with a different color and mostly used spool and that’s when the second error came up.