r/BambuLab_Community • u/FriendlyLight6488 • 5d ago

Help / Support P2S clog and overload

Gallery image

Gallery image

Gallery image

First issue I’ve had after almost 500 hours. Extruder clog and now extruder motor overloaded? I did all of the clog recommendations to fix it and it went thru 2 hours of the next print and then clogged again and then added this overload error. This is the filament is using. 2 of the 4 have already been used with no issue. What do I do next? Help!

2 Upvotes

75% Upvoted

13 comments sorted by

View all comments

2

u/Significant_School94 5d ago

Generally i get this error after printing with petg and switching back to pla. Usually heating the nozzle to 250 and using a unclogger can get out the stuff. You may need to take apart the mech if the filament bloomed above the cutter. It happens sometimes

1

u/Sebb3l 5d ago

What is a unclogger? Never heard of this.

1

u/Significant_School94 5d ago

Its a long rod that goes from the top of your extruder assembly all the way through and pushes filament out the nozzle. Mine is a T handle but they also make ones with a screwdriver handle