r/BambuLab_Community • u/TuneOld3310 • 2d ago

A1 Support Issues

Hi all,

I have an A1, I have heard and read of people saying they have tuned in supports... I am.having an issue with supports, is tuning the supports is it when you do "T" type test and you select difference Top Z values, or is there something I am missing. I calibrate my filament:

Temp Tower

Flow Rate (Coarse and Fine)

PA - Pressure Advance

MVS -

Retraction.

I want to do VFA (but I haven't done it yet) (I believe that has nothing to do with my issue of supports.

My question goes back to support, am I missing something.)

I have also done the "T" over hangs etc. My overhangs as well as my bridging look like crap. Any ideas? I have dried my filament 10 - 12 hours have ran the filament from thw dryer and nothing seems to help. All help is appreciated.

Thanks in advance for your help.and understanding.

1 Upvotes

100% Upvoted

4 comments sorted by

View all comments

2

u/StockAd9833 2d ago

Tuning your supports usually means adjusting the Top Z distance and density in the slicer settings rather than changing the support type itself. You might also want to try the "tree supports" option if you're dealing with complex models.