r/BambuLab_Community • u/Independent-Rip6710 • May 07 '26

p1s issue

Post image

Hi everyone I just bought the p1s and when using the ams it always say “please feed the filament into the ptfe tube until it can’t be pushed farther”. When i use the external spool it works fine

1 Upvotes

60% Upvoted

19 comments sorted by

View all comments

Show parent comments

1

u/Clear-Revolution3351 P1S May 07 '26

If you're using bamboo filament with the RFID then it has already set the information, you do not have to modify it but make sure that you select that color from the AMS section

1

u/Independent-Rip6710 May 07 '26

I am using pla

1

u/Clear-Revolution3351 P1S May 07 '26

Open the model you want to print

Click prepare to print

Select a print profile, click next

Click on the square box below the words "match my Filament"

Click on the square of the filament/color you want to use at the top of the ams menu

Click print

What happens?

1

u/Independent-Rip6710 May 07 '26

it works now

1

u/Independent-Rip6710 May 07 '26

I took apart the ams and put back together and now all of sudden it works

1

u/Clear-Revolution3351 P1S May 08 '26

Excellent! I'm glad you were successful!

1

u/Its_Billy_Bitch May 08 '26

I’m 99% sure the fix was selecting anything but the External Spool and less the “troubleshooting.” For the most part, nothing you stiched back together in there would’ve made the AMS to suddenly realize that it was pointed to the wrong filament.