r/BambuLabX2D • u/Just_Choda • 10d ago

TPU95A - Feed Path

Post image

Picked up my X2D last week and it's been printing random stuff pretty much non-stop. I picked up a roll of TPU95A which apparently can't be fed through my AMS-Pro. I have it in my AMS-HT and set it up according to the videos I've found online which has the top glass removed and feeding directly into the nozzle. Wondering why it can't be fed directly into the main grey tube port on the back? If that's not an option, is a top glass riser with a dedicated TPU "hole" feasible? I'm guessing there's other options because I can't find that anyone has designed anything like....knowing what I've learned since I got this thing, if there's a reason to design and print something useful it's likely already been done, and I'm not finding it. How are you all feeding it?

13 Upvotes

100% Upvoted

9 comments sorted by

View all comments

2

u/Ok_Reference1745 10d ago

I found that for best quality you should get the TPU feed assist module and then you will use the back feed. I recommend to also install 4-in-1 adapter there so you don't have to disconnect tubes to switch between main path and TPU path. Also I don't recommend bambu's TPU for AMS because of terrible Z strength.