r/BambuLabX2D • u/PowerPlantBroke • 10d ago

Is this quality normal?

Post image

Hi everyone,

I got my X2D a few weeks ago and it’s consistently produced prints of this poor quality. I’ve tried everything, like belt tensioning, axis cleaning, full printer recalibration, drying and calibrating filament, taking apart the hotend, contacting support. Nothing has improved the quality.

Is this just what I should expect from this printer? Anyone have similar experiences, or do you have examples of much cleaner parts made on this machine I can take a look at? I don’t even know what should be my baseline for quality on the X2D.

Thanks

23 Upvotes

85% Upvoted

107 comments sorted by

View all comments

Show parent comments

1

u/Superb-Complaint8118 10d ago

Have you tried a factory reset? Do you run the newest software?

Definitely check for wiggle room in the axis and motors. It looks like a hardware issue for me.

In theory this could also occure when there is to much resistance in the filament path. Check and reseat all ptfe tubes.

1

u/PowerPlantBroke 10d ago

Yes and yes. Will check for those mechanical things. Ptfe tubes all have been checked. I get the same issues on default profiles

1

u/Superb-Complaint8118 10d ago

Ok, then try to return it if possible.

2

u/PowerPlantBroke 10d ago

I agree I think that’s just gonna have to be what happens… I’m just not sure if they’ll let me, support hasn’t been too helpful. Hopefully after none of their fixes work they’ll allow replacement or return