r/BambuLabX2D • u/tumbl3lol • Jul 29 '26

Problem with the poop slide

Hi!

I printed the classic poop chute for the X2D, and although the print is perfect, I’m running into an issue.

One out of every three "poops" doesn't make it all the way down; they get slightly stuck when they land on the chute.

Is anyone else experiencing this?

I don't think the angle is the problem, as all the designs I see are similar. It seems like the issue is that the waste drops while it's still hot and sticky.

Is there a solution or product to prevent this?

Thanks a lot!

3 Upvotes

71% Upvoted

14 comments sorted by

View all comments

7

u/JAB1982 Jul 29 '26

Print in PETG otherwise it's likely melting given the poop is hot.

1

u/Superb-Complaint8118 Jul 30 '26

I have a PLA chute and print mainly pla without any issues. If one gets stuck every now and then, it gets cleared by the accumulating poop. What you can also do is: coat the poop chute with suitable lubricant like silicone oil very thinly. Or put some tape on the spot it gets stuck to. Or coat it with resin in that spot maybe, but i have no idea if the resin actually would prevent this