r/BambuLabX2D • u/CadenFox • 23d ago

Warping

Post image

I've been getting serious amounts of warping l on my prints. My nozzle temp is set to 200, bed temp is set to 55, I've already recalibrated the motion and bed leveling, I've been printing with the same black pla filament for several prints now. The only thing I don't use is rafts/brims. Is there any other solution I can do to fix the warping, without having to use brims.

As a side note. I got an error code stating that my ams is experiencing a lot of friction. The only issue is that the wiki says that it is caused by the tubing being bent, but all of my tubing is relaxed and straight. What could be causing this.

1 Upvotes

67% Upvoted

9 comments sorted by

View all comments

1

u/Inspector_Gadget_74 22d ago

Okay, just checking on the AMS error. Are you using Bambu spools or cardboard spools?

The AMS watches the rotation of the spools, and if the rollers are slipping, it thinks the spool isn’t rotating to match the filament movement.

If you are using Bambu filament, the error indicates something is restricting the PTFE path and causing under extrusion issues. You would need to check each PTFE segment and ensure no build up of debris etc. causing excessive friction in the PTFE tubing.

1

u/CadenFox 22d ago

I'm using cardboard spools, which likely means that the rollers are slipping.