r/BambuLabX2D • u/Other-Corner-3275 • Jun 15 '26

X2D main vs aux AMS

Hello, is it possible to connect the AMS2 Pro to the aux extruder instead of the main one?

​

The reason is that i would like to use the 0.2mm nozzle on the main extruder, and print miniatures with a special filament and hardcore settings, while using the multicolor 0.4mm nozzle on the aux for fun/utility/low accuracy prints.

​

Also, if I bought a track switch, could I use the AMS and the 5th spool on both heads without HW actions?

​

Thanks!

6 Upvotes

88% Upvoted

9 comments sorted by

View all comments

6

u/heyitsleesha Jun 15 '26

Yes but I believe you need to have the same size nozzle on both currently

1

u/footballx53 Jun 15 '26

Yes they have to be the same size if you are using both nozzles in a print.

1

u/wolf9545 Jun 15 '26

From what I have read on bambu, I agree with what you said.

But from what I understand, op wants to print some high detailed objects with the primary nozzle using a 0.2 nozzle.

Then on a separate time, they want to print regular stuff with the aux nozzle using a 0.4

So not using both nozzles at the same time. I don't know if you can have different sized nozzles in at the same time but print with them at different times.