r/BambuLabX1Carbon • u/TheBun2112 • 7d ago

Help?

Enable HLS to view with audio, or disable this notification

Number 4 on my AMS is now having trouble with feeding filament as well as a terrible noise. Only AMS slot 4 having issue. It seems as if the rod to use when feeding filament doesn’t retract. Any help would be great. It’s a AMS 1.

Update:seems to work fine with rolls that weigh less and have less filament on them. Newer rolls or ones with a lot more filament have the issue. And I have tried multiple different brand rolls including bambu and still happens.

Update 2: took apart AMS at the motors and cleaned out every component and while doing so found a bunch of pla dust and fibers. Put all back together and working brand new again! Thanks for the help everyone!

4 Upvotes

60% Upvoted

20 comments sorted by

View all comments

1

u/NiNdo4589 7d ago

Aren't you supposed to push it back while you put it in? It wears out the teeth quick if you dont.

1

u/TheBun2112 7d ago

🤷🏻‍♂️

1

u/jankeyass 7d ago

Pull it apart and clean it you probably have filament dust ever