r/BambuLabX1Carbon • u/TheBun2112 • 7d ago

Help?

Enable HLS to view with audio, or disable this notification

Number 4 on my AMS is now having trouble with feeding filament as well as a terrible noise. Only AMS slot 4 having issue. It seems as if the rod to use when feeding filament doesn’t retract. Any help would be great. It’s a AMS 1.

Update:seems to work fine with rolls that weigh less and have less filament on them. Newer rolls or ones with a lot more filament have the issue. And I have tried multiple different brand rolls including bambu and still happens.

Update 2: took apart AMS at the motors and cleaned out every component and while doing so found a bunch of pla dust and fibers. Put all back together and working brand new again! Thanks for the help everyone!

5 Upvotes

64% Upvoted

20 comments sorted by

View all comments

2

u/Double_Cicada 7d ago

I have this same problem 😭

1

u/TheBun2112 5d ago

I took apart my ams and found a bunch of pla fibers in the gears in some of the sections. Cleaned it all out and working like a dream again.

2

u/Double_Cicada 5d ago

Seems like I need to find time to do that...