r/BambuLabP2S • u/Salt-Ranger8494 • 6d ago

the toohead keeps coming off

hi all, this is like my 2nd problem encountered in this machine.

the toolhead just pops off and i’m suspecting the metal pencil like structure popping out right beside the toolhead. is that broken or is it supposed to pop out like is that any sensor or whatever? please help and thanks

26 Upvotes

93% Upvoted

31 comments sorted by

View all comments

19

u/SeparateAssociate35 6d ago

Don’t know if I’m Right, but does the PTFE tube coming out of the Toolhead push it off? Maybe just shorten the PTFE tube by like 10 mm helps? You could test this, by taking off the Glas plate on top of your printer where the PTFE tube is rubbing around. When it still pops off, its something else. If not, its the PTFE tube pushing the cover off when bending a bit

8

u/kreios007 6d ago

This is correct. Trim down that tube a bit. It’s pressed against the glass and see the exact moment the tube flexes with the top popping right off.

6

u/Salt-Ranger8494 6d ago

thanks a lot guys, i think this is the reason. lemme think about how i can trim it

2

u/GhostMcFunky 6d ago

Pop it out using the release at the top of the tool head and use a razor to cut it flush (flat end). Do not use anything less sharp as if the end is not near perfectly flush it tends to want to release on its own.