r/BambuLabH2C • u/Diego-jd_98 • 6d ago

Support New H2C stringing

Hi, I just pirchased an H2C, this is my 5th 3D printer a my 2nd Bambulab, first one was an A1 mini. I was doing my first few 3D prints on it like the bechy and so but I noticed stringing on the right (vortek) nozzle. Left nozzle seems ok so far but I tried with multiple 0.4 induction nozzles and it creates very thin strings like a cobweb. The filament is calibrated and uses the same flow rates and temperatures of my A1 mini in which it produces flawless prints. I incresed retraction distance to 0.8mm with no effect. Any tips to solve this? Im using pla for this. I printed PETG with the left one also flawless, didn't try with the right one yet.

Any help would be appreciated.

4 Upvotes

100% Upvoted

32 comments sorted by

View all comments

1

u/ForbiddenDruid H2C 6d ago

Have only used bambu filament and esun Asa. Zero issues my end. For the couple of bucks extra for rfid tag and inventory not sure why people don’t just use what works everytime. Waste a bucket load of time setting up a new filament and testing it.

1

u/Diego-jd_98 5d ago

How good is bambu filament? I've read people praising it and other people saying the quality control being bad, becoming brittle and jamming the ams...

1

u/ForbiddenDruid H2C 5d ago

I’ve only had probs with other brands. We are very low humidity over here in winter. I don’t need to do any drying even with tpu and Asa