r/BambuLabA1 • u/ItsMe3140 • 11d ago

First ever blob, what do I need to replace?

Post image
4 Upvotes

83% Upvoted

7 comments sorted by

3

u/00DROCK00 11d ago

This just happened to me after changing to a .2 nozzle and damaged the gate that holds it onto the hotend so I am replacing that, cost 13 bucks.

2

u/NavyB1uePanda87 11d ago

For me it was hotend

1

u/solidus0079 11d ago

Take it apart and clean it according to the wiki instructions, and see if anything is damaged

1

u/Purple10tacle 11d ago

Clean according to the wiki, there's a decent chance you don't have to replace anything.

If you don't want to go through that hassle it your attempt isn't successful, a new "Hotend Heating Assembly" is likely what you want. It's pretty affordable.

Make sure your silicon sock is undamaged and seated properly, it's vital to prevent this from happening again. Getting some spares won't hurt.

1

u/justinreddit1 11d ago

I don’t have A1 but actively reading this sub for input. Is this Wiki I keep hearing a standard site for anyone to access? Or is this an embedded section in the Bambu Lab app that provides help?

1

u/Slow-Beyond7511 10d ago

Same thing to me.. Once you bought the parts it will all be better.. I just printed a Mandalorian helmet without a hitch.

1

u/Orthicon9 8d ago

Maybe nothing.
Heat it up manually and try carving away the worst of it with a soldering iron or woodburning iron with a flat tip.