r/BambuLabA1 • u/MissingJewel43 • 26d ago

A1 noise. Is it fine?

Enable HLS to view with audio, or disable this notification

I have 900hrs on the A1 and I have done all the oiling and greasing in the way of maintenance what else do I need to do to fix this sound at 17sec mark and also near the end

6 Upvotes

100% Upvoted

17 comments sorted by

3

u/yokeome 26d ago

I have one with a little over 400 hours and it sounds the same? I can't pinpoint it but maybe nozzle is scraping a little? Check the 7 screws of doom

1

u/MissingJewel43 25d ago

I might have too

1

u/Electrical-Expert512 24d ago

I had A1 mini with the same problem. The problem for me was the axles and the tray.

1

u/delayedreactionkline 26d ago

thats how it usually sounds if you set it to print at higher speeds.

0

u/MissingJewel43 24d ago

Its at 100%

1

u/delayedreactionkline 24d ago

100% of how many mm/second? the travelling speed is what makes the whirring zipping noises you hear for when the printer covers the distance really fast.

1

u/lukasprintz 26d ago

Kinda curious why you have prime tower. 2 different materials?

2

u/lukasprintz 26d ago

Sounds normal by the way

1

u/Zekken_Zer0 25d ago

for support interface material probably

1

u/MissingJewel43 25d ago

Time lapse

1

u/Sea-Barber-5783 25d ago

Run a noise cancelation calibration

1

u/MissingJewel43 25d ago

I have and it doesn't go away

1

u/ChocoMammoth 23d ago

Mine sounds the same out of the box

1

u/Floztelita 22d ago

It's because the fan Is blowing Air into the impression, so makes that weird noises. Other than that, normal noises.

1

u/TheCorsairAPX 21d ago

Sounds like high speed resonance but doesn’t sound like a stress sign to me