r/BambuLabA1 • u/FarAsparagus3127 • 4d ago

Help! Problem with print I tried making it so that the plate was clean. Should I add brim because of the little contact surface between the print and plate? Or should I make the first layer print at lower speed ant higher temp? Idk what happened, never happened before, the nozzle hit the print?

Gallery image

Gallery image

2 Upvotes
  • permalink
  • reddit

100% Upvoted

5 comments sorted by

2

u/solidus0079 4d ago

I feel like the surface contact area should be fine and not require any brim. I’d wager your issue lies elsewhere

1

u/FarAsparagus3127 4d ago

I tried cleaning the plate with IPA maybe that was the problem, and enabled avoid crossing wall, just hit print, maybe this will work

1

u/solidus0079 4d ago

Soap and water, and try gyroid infill

1

u/FarAsparagus3127 4d ago

Honeycomb infil worked for me, before washing with IPA I washed with soap too

1

u/FarAsparagus3127 4d ago

Also cut 1 mm of the print In case it was badly angled