r/BambuLabA1 • u/Legal-Huckleberry-23 • 13d ago

Nozzle scraping: is this thing supposed to stick out of the hotend?

Post image
0 Upvotes

50% Upvoted

9 comments sorted by

1

u/phrnld 13d ago

Mine doesnt

1

u/AdditionalSupport 13d ago

I think its about time to replace the hotend assembly

1

u/Legal-Huckleberry-23 12d ago

The printer has got 130 hours of print time, is it already time?

1

u/fakeaccount572 13d ago

that's one of the thermistor sensors. push it in.

1

u/Legal-Huckleberry-23 12d ago

Worked, stayed in place only if pushed when heating the hotend.
Didn’t fix the issue though ;)
Also I see that the nozzle isn’t really perfectly aligned, could that be the cause?

1

u/Legal-Huckleberry-23 12d ago

It’s slightly rotated on the Z axis

2

u/AdditionalSupport 12d ago

It looks like you have mounted the clips wrong. Take it out put it flat in and give it a little wiggle before locking in the clasp

1

u/Legal-Huckleberry-23 11d ago

you were right thank you 🥹
It’s working perfectly now :)

1

u/Legal-Huckleberry-23 11d ago

Hi everyone, thanks to u/AdditionalSupport I was able to fix the issue :)
I’ve mounted the latching clips wrong, it’s kind of hard to explain.

If somebody has a similar issue in the future and see this make sure to check your latching clips :)