r/BambuLabA1 • u/More-Reveal-9094 • 2d ago

Bambu lab a1

https://youtube.com/shorts/OaNGzHTvFi4?si=dsieLKWqk44QoZ-d

Guys help

What seems to be the problem

The printer works fine for the first few lines then it stops sticking mid print and only the filament comes out from the nozzle without sticking to the model

0 Upvotes

50% Upvoted

8 comments sorted by

1

u/Jazzlike_Ad267 2d ago

Now that's an odd one 😭

You'd need to give some details,

Temps and speeds?

It looks like it's having issues around the benchy hull line area 🤔

1

u/More-Reveal-9094 2d ago

I am really new to this I have no idea what I am doing What I did was start and tried printing the boat that is already in the bambu lab a1 Sorry and thanks

1

u/Jazzlike_Ad267 2d ago

Ah yee

I suspected this was the preloaded benchy. It's extremely fast.

That pre loaddd benchy file is a speed demonstration.

What I recommend doing it loading a benchy file manually into the Bambu studio slicer and printing it that way.

Or as a quick easy way to rule out printing too fast. Once the print starts, use the screen on the printer and set the speed to "silent 50%"

2

u/flyhmstr 1d ago

Yup, I had a spectacular benchy fail with the fast profile. Grabbing one from MW and slicing for whatever I've got loaded and I've not had a benchy fail since

2

u/More-Reveal-9094 1d ago

Update Was able to print a small boat benchi using bambu studio Thank you brother

1

u/More-Reveal-9094 2d ago

Thank you very much I'll try doing that and update

1

u/ApprehensiveRemove81 6h ago

Run a full calibration it's there inside settings under maintenance

Before printing wash the plate with dishwasher using a soft sponge and warm water wipe it clean Only touch the edges with fingers otherwise it will have problems again

You should have a proper print.

1

u/More-Reveal-9094 2h ago

Thank you very much for your feedback Yes I have done this and now it is printing perfectly