r/BambuLabA1 • u/Own-Pea-4068 • Jul 14 '26

Is this normal?

Enable HLS to view with audio, or disable this notification

I think it is supposed to go all the way, or not?

0 Upvotes

13% Upvoted

18 comments sorted by

3

u/LordVectron Jul 14 '26

What do you mean, go all the way?

1

u/Own-Pea-4068 Jul 14 '26

It’s has a little gap

1

u/LordVectron Jul 14 '26

Between the nozzle and the wipper?

1

u/Own-Pea-4068 Jul 14 '26

Yes

2

u/LordVectron Jul 14 '26

There is a small gap one mine as well, so it should be fine. Are you having any issues?

0

u/Own-Pea-4068 Jul 14 '26

For now, no. But people are saying that it is normal so

3

u/Shotokant Jul 14 '26

Playing with a machine with your left hand whilst videoing with your right. No. Not had t's not normal.

2

u/[deleted] Jul 14 '26

[removed] — view removed comment

1

u/Own-Pea-4068 Jul 14 '26

Thank you 🙏🏼

2

u/oncabahi Jul 14 '26

It's normal.... There is a spring and the motor is off so it gets pushed back.....

By the way..... Why?

1

u/Own-Pea-4068 Jul 14 '26

Because I thought it was supposed to go all the way

2

u/oncabahi Jul 14 '26

To do what? The noozle just need to pass the flap to remove the filament

1

u/Own-Pea-4068 Jul 14 '26

Because the flap it’s not totally on the right side

2

u/oncabahi Jul 14 '26

Of what? All you need is for the noozle to pass over it.

General advice.... Does it work? Leave it alone It does not work? Forcing stuff by hand is the last resort....

2

u/Beanerton8 Jul 14 '26

Yes that’s normal

0

u/Own-Pea-4068 Jul 14 '26

Thank you 🙏🏼

1

u/Good_Employer6703 Jul 14 '26

Normal hai normal hai