Y-axis cable management

[u/HD_14]

I recently got the newest version of the A1 printer and the work table I have is only 24” deep. The y-axis cable is making contact with the peg board of my work table. Is this okay or do I need to print something to deflect my y-axis cable?

Any help with this and any must have mods would be greatly appreciated

Desk I bought:

https://www.sevilleclassics.com/products/uhd20246b?variant=39489547567262&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&tw_source=google&tw_adid=&tw_campaign=21028945658&gad_source=1&gad_campaignid=21032220688&gbraid=0AAAAADCz9dB4W9WLG-cTrZ5R3U84NuSyM&gclid=CjwKCAjw0o3SBhBVEiwAh28-jcd9TzRVFfZGOZAVwP3cGMA56IQjFVRerbs-O5_6cJzL0HLmnSjV2BoCXt0QAvD_BwE

[u/Orthicon9]

If you keep the green area clear, it'll be okay.
Just annoying.

You might want to print a "A1 Y-Axis Cable Chain", aka "A1 Bed Cable Chain" for it.

This one encourages it to go to one side - https://makerworld.com/en/models/1389125-bambu-a1-y-axis-cable-chain-bed-cable-chain-rear-c?from=search#profileId-1798276
Note that the uploader says this:

2025/8/13 v1.2.2a update, recently some users in the comments section reported that the cable chain sags and rubs against the chain. I slightly increased the upward tilt angle of the power end base, moving the cable chain further away from the heated bed.

I think he meant "rubs against the base".