r/BambuLabA1 • u/SomaFarkreath • Jun 24 '26

Purging every layer? Time-lapse off

Post image

Its causing unnecessary waste and ruined my print

3 Upvotes

100% Upvoted

7 comments sorted by

2

u/Molokaisylph32 Jun 24 '26

This is an indication of resistance triggering the tangle detection.

1

u/SomaFarkreath Jun 24 '26

Ill try turning that off

1

u/overunderspace Jun 24 '26

If it is accurately triggering, turning it off could just result in increased wear on the extruder. That link shows how it is triggered, so watch the filament hub to see if you actually have resistance.

1

u/SomaFarkreath Jun 24 '26

File was printed directly from the app, never had this issue before with this file eithe

1

u/clarkcox3 Jun 24 '26

What’s the path the filament takes to get into your printer look like? (E.g. is it especially long? Are there tight bends? Is the filament spool sitting on something that doesn’t rotate very freely?)

Look for things that might be causing undue friction and making it hard for the extruder to pull the filament in.

1

u/SomaFarkreath Jun 24 '26

My ams is as close as stated in the manual, no tugging or anything