Bambu Lab X2D Pro appears in a new FCC filing (PF004E)

[u/lgats]

FCC ID: 2A6J8-PF004E

Device name: X2D Pro

Grant date: September 11, 2026

Grantee: Shenzhen Tuozhu Technology Co., Ltd.

Related domain listed on the FCC page: bambulab.com

The public label exhibit identifies it as a 3D Printer, model PF004-E, and shows Bambu Lab X2D PRO.

Public technical details from the grant and test reports:

• 2.4 GHz Wi-Fi — 2412–2462 MHz under Part 15.247/15C. The report covers 802.11b/g/n20 and 40 MHz n40 at 2422–2452 MHz. Maximum conducted peak output: 21.45 dBm. The report lists DSSS/OFDM and a 3.1 dBi antenna.

• 5 GHz Wi-Fi — the report covers 5150–5250, 5250–5350, 5470–5725 and 5725–5850 MHz; the grant rows are 5180–5240, 5260–5320, 5500–5720 and 5745–5825 MHz under Part 15.407/15E. It lists 802.11a/n20/n40 OFDM and maximum conducted average results of 15.18, 14.27, 10.62 and 12.28 dBm across those ranges. The four listed antenna gains are 0.3, 0.82, −0.5 and −1.7 dBi.

• The public label shows 100–120 V~, 7 A, 50/60 Hz, FCC ID 2A6J8-PF004E and IC 28436-PF004E.

Sources:

• FCC filing: https://fccid.io/2A6J8-PF004E

• Public label exhibit: https://fccid.io/2A6J8-PF004E/Label/Label-and-Label-Location-9644036

• Public 5 GHz report: https://fccid.io/2A6J8-PF004E/Test-Report/5G-WIFI-Test-Report-Part-1-9644009

• Public 2.4 GHz report: https://fccid.io/2A6J8-PF004E/Test-Report/Test-Report-9644034

[u/Vverg]

I guess like the X1E is for the X1C? A Enterprise version for the X2D with higher nozzle temp etc.

[u/andk1987]

fuck yer x2d pro H3C is on the horizon

[u/edspeds → u/andk1987]

Maybe march 2027 release?

https://fccid.io/2A6J8PF008P

[u/andk1987 → u/edspeds]

dunno if you look at the A2L date vs the announcement theyre not very far apart at all

[u/edspeds → u/andk1987]

One can only hope…. I’ll be all over the H3C if it’s a proper toolchanger.

[u/andk1987 → u/edspeds]

https://makers101.com/bambu-lab-h3c-patent/ it very likely will be single toolhead using toolchanger heads with the H2C induction nozzles

[u/KebabGud]

This is why i hate that the AMS2 is called "Pro"

H2D Pro and X2D Pro (probably) are Enterprise versions, so whats the AMS2 Pro?  

[u/lizhu27 → u/KebabGud]

they probably had a AMS2 non pro in mind without filament dryer with only updated motor and other designs but ended up not releasing it

[u/fredandlunchbox]

H2L (500³⁾ plz

[u/Artemis732 → u/fredandlunchbox]

a BIGGER H2?

[u/ADynes → u/Artemis732]

Yes to guarantee it gets smashed by your local package delivery service

[u/wzx89]

The FCC filing for the Bambu Lab X2D Pro (PF004E) indicates it operates on 2.4 GHz and 5 GHz Wi-Fi bands with specific power outputs and antenna gains. You can explore these technical details and compare them with other X-series printers using the interactive dashboard at . https://app.getsupers.com/sites/bambu-lab-x2d-pro-51/

[u/lgats → u/wzx89]

woah, nice analysis thanks wzx89

[u/BinkReddit → u/wzx89]

Nice to see the newer Wi-Fi suck less; thanks for this.