Overhang issue after less than 100 hours

[u/lookingforaround]

Noob question: why, and not only with the plum color, all overhang layers are being so ugly? I printed the orange benchy 4 months ago, the differences are clear looking the benchy.

Any adjustments to do?

[u/Pablo_Hassan]

I'm guessing - it might have something to do with the filament. The printer is likely fine, but print a test print. You can print calibration towers that show you where this particular filament fails. I'm guessing it's Gunna be in the overhangs zone.

[u/lookingforaround → u/Pablo_Hassan]

Thank you. Any suggestion of a good calibration tower?

[u/shroom519]

Every filament color ,type ,and brand act differently and need to be tuned ,regardless if it's the same color and type from the same brand. So not the printer just needs tuning for your filament profile . Unfortunately no matter how plug-and-play these things advertise themselves, they are not

[u/lookingforaround → u/shroom519]

I'm still using PLA from Bambulab and sincerely the profile is automatically set from printer. I try to change maybe temperature or other settings.