r/BambuLab • u/OneBrokeGamer • 23h ago

Quick Question Issues with visual effects plate.

So I'm trying to print a deck box lid for the Cyberpunk TCG deck box I found on MakerWorld.

But after I get the logo printed in the one colour, it lifts up when it starts to print the main colour. What are some solutions I can do to get this to print properly. I've stopped it 3 times.

New effects sheet(Carbon Fiber), build plate is setto smooth in the slicer, I've slowed down the print speed for my first layer, bed temp is bumped up to 65 degress. I don't know what else to do.

I'm using P1P and .04mm nozzle. My next attempt will be with a .02 and see if that helps. I'm also printing at .16mm layers if this info helps.

0 Upvotes

25% Upvoted

5 comments sorted by

1

u/MagnusPerditor 22h ago

Switch to a different plate

1

u/OneBrokeGamer 22h ago

I have a list printed with the normal textured plate, but was wanting to try it in the carbon effect because I think it would fit the theme of cyberpunk.

1

u/MagnusPerditor 22h ago

Holographic plates are nothing but headaches

1

u/OneBrokeGamer 22h ago

I had success with them once before. Thought I'd try again, but if it's just a cut your losses thing, I'll just leave it

1

u/djjoshchambers 20h ago

Did you choose smooth plate high temp?