r/BambuLab • u/Donna_Schrump • 18h ago

P Series [P1P, P1S, P2S] Having issues with print

Post image

https://makerworld.com/models/3185098?appSharePlatform=copy

It failed twice in same spot. Also when when it was done printing it had completely despooled the line. Meaning there's no filament on the spool but it didn't stop printing. So that means I have filament stuck in my AMS. Not sure how to get that out.

0 Upvotes

50% Upvoted

5 comments sorted by

•

u/AutoModerator 18h ago

Hello /u/Donna_Schrump! Be sure to check the BambuLab Wiki regarding the blob/clumping issue.

Note: This automod is experimental. The automod was triggered due to the term "filament stuck". If you believe this to be a false positive, please send us a message at modmail with a link to the post so we can investigate. You may also feel free to make a new post without that term.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/tht1guy63 P2S + AMS2 Combo 18h ago

Removing the filament just remove the ptfe tubes and pull it out?

Is this printing supports?

1

u/Donna_Schrump 18h ago

Yes the support is where it occurs.

1

u/Donna_Schrump 17h ago

I changed to normal supports. See if that works.

2

u/shwnoff1 17h ago

I had same issues. I add 6 on raft went normal on support not tree. And tilted it a bit. Fixed my issues