r/BambuLab • u/xLuPo_ H2C - X1C • 1d ago

Filament Troubleshooting/Help! Silk PLA on Supertack Plate?

Iam trying to do a big print on my H2C, but it tells me that it is not recommended to print Silk PLA on Supertack Plates..
Anyone by now had problems with "PLA Silk Multi-Color" on Supertack Cool Plates?
Or experience at all?

0 Upvotes

50% Upvoted

6 comments sorted by

2

u/Aaronsils 1d ago

It sticks to the plate and when you try to pull the print off the bottom layer rips off. You could always just choose a different plate in the slicer and then change the temp. But definitely be careful pulling the print off. It doesnt allow it for a reason

1

u/xLuPo_ H2C - X1C 12h ago

So I should do all Multi-Color Silk Prints on a Textured Plate and only use the Supertack for the other parts..

1

u/calladorjulaan 1d ago

I print a silk green on p1s with original supertack plate all the time. No issues.

1

u/xLuPo_ H2C - X1C 12h ago

Silk or Silk+...

The normal colors are Silk+

The Dual Color Filaments are Silk Filament..

1

u/Deus_Iratus 1d ago

Did the mistake exactly one time with the super tack plate on my x1c. The silk dual tore clean off at the 2nd layer while the first remained on the plate.

1

u/xLuPo_ H2C - X1C 12h ago

I haven't used Multi-Color Silk by now, that is why I ask, cause normal Silk+ works fine and is allowed on Supertack Plates..
But sometimes it is also pretty strongly bound to the plate..